G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Sketchy Posted on Sunday, May 20, 2012 - 09:01 pm:        I am drilling out the top, front bolt that holds my headers on as it snapped. I have brand new ceramic headers to be installed and my mechanic is saying he has to drop qthe engine to drill out the front bolt and install the new header Is this right?   Iamarchangel Posted on Sunday, May 20, 2012 - 10:21 pm:        Yes. It's not a full drop but it might as well be. Invest in an old fashioned hand impact tool for this job. Taking off these kinds of nuts/bolts is what that tool is made for.   Terrys1980 Posted on Monday, May 21, 2012 - 10:29 am:        Rotating the engine on the XB is really not a hard job. A decent mechanic can have it down in about an hour.   Firemanjim Posted on Monday, May 21, 2012 - 08:01 pm:        An hour,he is lollygagging! Done so many now I can do it in my sleep,----oh, and I am not happy with having done so many, but about 30 percent of the Buells that come in for a dyno have bad seals.   M1combat Posted on Tuesday, May 22, 2012 - 04:23 am:        Yeah... an hour with a couple smoke breaks.   Iamarchangel Posted on Tuesday, May 22, 2012 - 09:34 am:        I've done it a couple of times. Haven't got it down to an hour but I guess after a couple it's doable. Taking all the plastic off at once instead of stages saves time. The cooler sub-frame can be left dangling for header removal. Wonder what the book rate is on that job?   Nillaice Posted on Tuesday, May 22, 2012 - 06:51 pm:        i've swapped headers on a few XB's 12 and 9's/ the 9's are easier to do with out dropping the motor. BUT }it's more of a hassle than to eff with everything else and you will more than likely end up over-torquing your rear header studs. then, when they snap like mine did, you will have to buy a jim's tool and swing the motor down anyways.   Joel9 Posted on Tuesday, May 22, 2012 - 09:32 pm:        jim's tool? i didn't use one to rotate my motor. should i have? who's jim anyways.   Sgthigg Posted on Wednesday, May 23, 2012 - 03:29 pm:        LOL   Nillaice Posted on Saturday, May 26, 2012 - 05:03 pm:        there are many jim's tools. thh one i'm speaking in reference to is for drilling out the exhaust header stud from the jug. http://www.handsontools.com/JIMS-1705-Exhaust-Stud -Drill-Plate-for-Harley-Davidson_p_19333.html   Gregoxb Posted on Friday, June 29, 2012 - 09:47 am:        Its very easy to change your headers without doing an engine drop. Check out my video: http://www.youtube.com/watch?v=WxozheEre64&feature =plcp There is more than one way to skin a cat. Which way you chose, that's up to you.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: