| Author | Message | ||
     Ustorque |
Anyone have the oil filter cross reference list for the tubers? | ||
| Kyrocket |
Originally posted by Pkforbes back sometime in '09. Glad I found it or I would have had to type it all out from the list I have printed out and taped in my service manual. (hint hint) Cross referenced filters are as follows: AC PF1245 AC PF1787 AC PF53 BRIGGS 491056 CHAMPION LAB. PH2835 FRAM HP7 FRAM PH3614 FRAM PH6022 FRAM PH7575 FRAM PH9342 FRAM PH9566 KOHLER 5205002 KOHLER 5205002S MOBIL1 M1102 MOBIL1 MO241 MOTORCRAFT FL793 MOTORCRAFT FL910 ONAN 1220645 PURO L10028 PURO L10241 WIX 51215 WIX 51348 WIX 51391 WIX 51785 WIX 57023 WIX 57181 KN-171B and KN-171c Both of these filters are 4" long. One is a black finish and one is chrome - noted by the "B" and "C" in the PN#'s. The 1002 filter is white with a K&N decal wrapping around. Hope this helps. And this came from Jersy Guy in '07... Here you go: Buell Oil Filter Equivalents ACDelco # PF1233 Amsoil SDF10 Bosch # 3311 Champion # C138 Fram # PH4967 HD # 63806-004 K&N # hp-1003, KN-177 Mighty # m4477 Napa # 1394 Mobil 1 # M1-103 Motorcraft # FL836 Penzoil # pz39 Purolator # L14476 STP # S4967 Valvoline # vo40 Wal-Mart Super Tech # ST4967 Wix # 51394 I just copied and pasted, be sure to check for sure the one you want will fit. Michael (Message edited by Kyrocket on May 18, 2012) | ||
| Ustorque |
Thanks Michael! The second list I believe is the XB chart, I have that in my XB manual. Thanks for the info, I stumbled around in the KV for a while hoping to find it! | ||
| 14d |
I've used this one a few times. http://www.calsci.com/motorcycleinfo/FilterXRef.ht ml I usually run a Mobil1 M1-102 but will be picking up a M1-209 next oil change as it has all the same specs as the "-102" but is a little bigger/longer for more capacity. I found some horror stories online about car oil filters causing oil starvation on motorcycles but they mostly seemed to be a case of a filter that fit but was the wrong specs. As long as you research carefully and use a filter that your engine was spec'd for you should be fine. Also lots of threads on other forums about automotive filters on motorcycles if you search the web a bit. | ||
| Essmjay |
I run the Purolator PL30001 when I want a big filter. | ||
| Gixxer86g |
You can also run Wix 51214. That's what I run. I would stay away from Fram. It's garbage. (Message edited by gixxer86g on May 18, 2012) | ||
| Thejosh |
Ditto, Frams are made with paper thin metal, I usually stick to a WIX 51394 or a K&N 171-B. | ||
| Eshardball |
I was running the Pure 1 filter but the manufacturer specifically says not to use it on a motorcycle as the media is efficient enough to starve the engine as motorcycle oil pumps operate at much lower pressure than a car engine. Went to the K&N for the extra capacity but it is huge and my cool collar does not fit. The dyna Long filter seems to be a good upgrade without looking unobtrusively large | ||
| Schmidt452 |
I would think that car filter would be ok since the filter does not filter the oil in the trans like other bikes. |
