G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Kyrocket Posted on Thursday, May 17, 2012 - 11:32 pm:        Refresh my memory, to get more torque and sacrifice the top end I need to reduce the size of the front pulley right? Or increase it? And, either way it goes where do I find one and what will fit? I've got a '99 X1 and would rather have the torque over the top end. I've had this bike almost 13 years and don't need the 100+ anymore. I've become a torque freak so I added a Vulcan 2053cc to the stable. Thanks   Imaposer2 Posted on Thursday, May 17, 2012 - 11:46 pm:        Smaller front, larger rear. Either way lowers the overall gear ratio and will make the bike quicker off the line.   Buellistic Posted on Friday, May 18, 2012 - 12:01 am:        Check the BELT TEETH on your COUNTER SHAFT SPROCKET which should have 27 teeth !!! www.AmericanSportBike.com should have a 26 tooth counter shaft sprocket ... (Message edited by buellistic on May 18, 2012)   Kyrocket Posted on Friday, May 18, 2012 - 09:02 am:        Thanks all. Buellistic, did you get the PM I sent you earlier?   Buellistic Posted on Friday, May 18, 2012 - 09:29 am:        Kyrocket: GOT IT !!! Will send you some PICTURES and PART NUMBERS ...   Kyrocket Posted on Friday, May 18, 2012 - 09:58 am:        I think this is the pic I posted that you noticed it in. Can't wait to get it back to this again.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: