| Author | Message | ||
     Hootowl |
http://www.badweatherbikers.com/buell/messages/384 2/679776.html?1336952961 Any ideas? | ||
| Essmjay |
What are the symptoms? No signals at all? Do the emergency flashers work? | ||
| Hootowl |
Nothing. No blinkers, no emergency flashers. | ||
| Buellish |
Jeff,the obsolete part number,68775-94Y,should be still available through vintage parts.I picked one up late last year.It was between 70 and 80 dollars. You have to ask the parts guy to check the number through vintage parts. | ||
| Hootowl |
Great. I'll give that a try. Thank you. | ||
| Screamer |
Try 68755-94Y or Y0508.8 through a dealer, they should be about $70-$80. | ||
| Essmjay |
This might work. http://www.ebay.com/itm/Harley-Sportster-Turn-Sign al-Module-1995-68570-94A-6500-miles-/110877174565? pt=Motorcycles_Parts_Accessories&hash=item19d0cb6b 25&vxp=mtr | ||
| Hootowl |
Wrong connector Shane, but thank you for looking. The one for an S2 has the connector molded into the back. I've found a used one on ebay, but they want $120 for it. Guess they don't know a new one can be had for less. Thanks everyone. I'm going to run through the wiring one more time, and if I don't come up with anything, I'll try the dealer. | ||
| Essmjay |
Have you tried bypassing the module and just send 12 volts through the wire to see if the wiring is ok? | ||
| Screamer |
Forgot to mention - I had this issue several years ago, but re-confirming the leads and grounds to the speedo resolved it (can't remember exactly which it was). | ||
| Road_thing |
Jeff: I might have an extra. I'll go look in the shop. rt | ||
| Hootowl |
Much appreciated Tom. | ||
| Road_thing |
E-mailed you. I've got a Y0508.8 I got with a basket case a few years back. It's yours if you can use it.  rt | ||
| 1313 |
I like the looks of the black ones a lot better than the red ones. Just sayin', 1313 | ||
| Hootowl |
Does that mean they are the same internally, or close enough?  Shane, trying to light them up manually is next on the list. | ||
| Midnight_rider |
have you done the test in manual ? i had same problem found broken ground wire in harness near front sprocket i was ready to buy module but i did not | ||
| Midnight_rider |
the module does ground through the factory ground point on frame.. has it's on wire i think pin one ,, i hope this helps | ||
| Hootowl |
I will be digging deeper this weekend. I hope it's just a wiring problem. | ||
| Hootowl |
All is well. The module Tom sent works perfectly. I now have turn signals! Thanks Tom! |
