| Author |
Message |
    
Mstrfrz
| | Posted on Wednesday, March 07, 2012 - 06:43 pm: | 
|
most of my interaction here has been via my iphone. Not a lot of time to go thru threads, unfortunately.
My lean condition is a result of it being rich and trying to correct itself.
My bad injector is just that: bad. Because the problem moved when the injector did, I know this to be the case. I'm guessing it was leaking because it was falling apart internally (running rich) and finally failed (no more squirt).
Aside from valve train problems, and a new TPS, I've done almost all I can think to do. |
Mstrfrz
| | Posted on Friday, March 16, 2012 - 01:30 pm: |
|
New injectors have arrived! |
Mstrfrz
| | Posted on Sunday, March 18, 2012 - 02:05 pm: |
|
New injectors + fresh gas + 35 miles = AFV of 81. Resetting AFV and unplugging O2. |
Terrys1980
| | Posted on Monday, March 19, 2012 - 08:58 pm: |
|
Damn that sucks! |
Mstrfrz
| | Posted on Tuesday, March 20, 2012 - 03:09 pm: |
|
Engine light came on on the way to work, presumably because the O2 was unplugged. It didn't come back on on the way home, though. I think I'll ride that way for a while, but will need to get a new TPS just to rule it out. THAT'S the part that really sux. |
Mstrfrz
| | Posted on Thursday, March 22, 2012 - 06:20 pm: |
|
Apparently, the engine light only comes on in the morning. Go figure. |
Mstrfrz
| | Posted on Friday, March 30, 2012 - 08:26 am: |
|
ok. So I put in the Race ECM, turned O2 off and closed loop idle off. Engine light came on during the ride to work. I assume that's the O2, but with it off, I shouldn't get a light, should I?
If I load the original EEEPROM, would that put the AFV and ECM CONFIG back the way I had it before I started any of this? I'd like to know what those settings were BEFORE I started messing around with ECMSpy. |
Mstrfrz
| | Posted on Thursday, April 05, 2012 - 10:20 am: |
|
"O2 inactive or open" fault. Silly to have the engine lite come on for turning off the O2 sensor. Running better: will set minimum AFV to 95 if I can and turn O2 back on, in case anybody is interested. |
Terrys1980
| | Posted on Thursday, April 05, 2012 - 01:14 pm: |
|
Hope it works out. |
Mstrfrz
| | Posted on Tuesday, April 24, 2012 - 08:34 am: |
|
New TPS. All seems right with the world... |
Terrys1980
| | Posted on Tuesday, April 24, 2012 - 07:36 pm: |
|
There isn't much left that you can change out! |
Mstrfrz
| | Posted on Thursday, April 26, 2012 - 07:44 pm: |
|
I forgot: when loading an EEEPROM (.txt) file, does that include maps? Or is it just a new EEEPROM and the maps are retained? |
Froggy
| | Posted on Thursday, April 26, 2012 - 07:57 pm: |
|
EEPROM contains the maps, similar to how a turn signal contains a bulb. You can just change out the bulb, or you can change out the entire complete turn signal. |
Mstrfrz
| | Posted on Thursday, April 26, 2012 - 11:21 pm: |
|
GREAT analogy. Thanks! |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through May 13, 2012 »
Crazy X1: help!!
