Author |
Message |
Vecchio_lupo
| Posted on Monday, April 16, 2012 - 09:19 am: |
|
Boys, I'm changing the shifter input shaft on my S3 and would like to borrow rather than buy a: Primary Locking Bar for Sportster and Buell Models PM me if you can help or call me, Joe at 812-854-2150 |
Noone1569
| Posted on Monday, April 23, 2012 - 11:44 am: |
|
Joe, if you find anyone with one of these, please let me know! We have a friend that could use one as well for a weekend. Might have a welder buddy cut and make one up for me. |
Jandj_davis
| Posted on Monday, April 23, 2012 - 12:23 pm: |
|
I sent Joe one that I made. They are really easy to make. I bought a piece of 1" x 1/4" x 4' aluminum bar stock from Lowes, cut a piece off of it, and ground/smoothed the ends to a round profile. I told Joe to keep my bar or send it on to the next guy. |
Vecchio_lupo
| Posted on Monday, April 30, 2012 - 08:53 am: |
|
I have ordered my input shifter shaft, as soon as it comes in and I get it installed, I would be happy to pass on the tool to any member of this forum. In the words of benjamin Franklin.... "If we don't hang together, we will certainly hang separately." |
|