| Author |
Message |
    
Ford92
| | Posted on Thursday, April 19, 2012 - 12:19 pm: | 
|
Has anyone had this problem? I need to replace my stater but I cannot loosen the sprocket nut I have a good size breaker bar I have replaced many sprocket nuts and stators and have never had this problem. I really don't like using an impact wrench sense they have a tendency to crack the magnets? Dave |
Sparky
| | Posted on Thursday, April 19, 2012 - 03:38 pm: |
|
Try heating the nut with a propane torch gently in order to soften the loctite if any is present. |
Ford92
| | Posted on Friday, April 20, 2012 - 12:26 pm: |
|
I tried heating same results won't move? I really do not want to use an impact gun any help is appreciated. |
Harleyelf
| | Posted on Sunday, April 22, 2012 - 09:29 am: |
|
Use an impact wrench, but not a big one with high air pressure. I use a small 110V electric one. Torque with the breaker bar, break loose with the impact gun. |
Ford92
| | Posted on Wednesday, June 27, 2012 - 10:44 am: |
|
Hi, Thanks for help. I finished up with stater that's find. I had a carbon fiber air filter on it and changed back to stock air filter and it noisy I don't remember this before? any help is appreciated. |
Ford92
| | Posted on Wednesday, June 27, 2012 - 01:59 pm: |
|
I found noise with air filter. But I got a noise seems to be coming from primary but everything seems to be working find shift's good, primary chain is find? |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through October 27, 2012 »
Buell stator S3