G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   1_mike Posted on Sunday, January 16, 2011 - 02:36 am:        I think this has been covered but the "search" function didn't bring up anything. I also looked thru my (mechanical) manual with no luck. My check engine light came on the other day (last Monday), but nothing seemed to be effected. It stayed on for two days. Then the third day leaving work, it went off right after being started to leave. Then came back on the next day at the same point (leaving work). Then Friday, with the light back on again, the engine seemed to be running odd. Isn't there a way to check the code it's throwing thru the dash cluster? Thanks Mike   Froggy Posted on Sunday, January 16, 2011 - 02:46 am:        Yup, hold down the MODE and TOGGLE buttons down on your dash while turning the key to on. It is in the manual somewhere, probably on the one page you didn't read Let us know what trouble code it has. If you recently installed a new Erik Buell Racing ECM, it will list a bunch of false historic codes that appear as part of the flashing process.   1_mike Posted on Sunday, January 16, 2011 - 08:50 pm:        Frank (Froggy) - Ha...my fault...! 0113 fault noted. Over the holidays, I had everything apart to run the valves, install a new stator and install a Barker exhaust system. Seems while I thought...I had everything reconnected, seems I didn't quite get the air temp sensor "fully"...plugged in..! That's why the signal was intermittent. I went over everything else again.... All is well. Thanks much for the tip. Mike   Djruffryd Posted on Monday, January 17, 2011 - 04:24 am:        I have gone through 2 stators within a year on my 09 R. Luckily, I'm still under warranty.   Liquidcooled Posted on Tuesday, February 08, 2011 - 11:59 pm:        Similar Question. I put the factory ecm back on the bike, so I can send my Erik Buell Racing back for a reflash. I failed to mention that i still have the stock exhaust. The check engine light is on. Will it eventually go off, or do I have to reset it somehow?   Froggy Posted on Wednesday, February 09, 2011 - 12:09 am:        Liquidcooled, that would depend on what is causing your check engine light to come on, look up the codes on your cluster.   Liquidcooled Posted on Wednesday, February 09, 2011 - 12:33 am:        Thanks Froggy I got a P0132 FRT 02 sys err and a P0693 LT fan sys err, Do these seem like ECM change out codes?   1125r_mofo Posted on Saturday, April 07, 2012 - 10:08 am:        Liquidcooled, How did you solve the "lt sys fan err"? I've just done the same thing, putting the stock pipe and ecm back on and received the same code. The left fan isn't turning either.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: