| Author | Message | ||
     Littlebuggles |
Bought this thinking to maybe splice the right side side plate into my modified M2 frame, than started thinking about powder coating it and building my M2 up inside this frame. I just haven't got the time, energy and equipment for this sort of project right now. Local police officer ran the vin for me to verify it is clear and clean. No problems there, I have the state form showing clean vin check. I do not have a title but will work on getting it if it's gonna be necessary to transfer the frame to a new owner. Check what your local law requires on this as it varies from state to state. I'll post pics and vin in the morning. Frame is straight. some light surface rust around the battery tray. | ||
| Littlebuggles |
Right side:  Left side:  | ||
| Littlebuggles |
VIN  | ||
| Littlebuggles |
Iso/Belt replacement plate appears to have a allen bit broken off in the hardware:  | ||
| Littlebuggles |
I can wash it and I have an aerosol type of rust converter/inhibiter I will be happy to apply before I ship it. I'm thinking somewhere in the range of $135 + shipping but am open to offers. | ||
| Purpony |
any idea what shipping to CT 06417 business address would be? | ||
| Littlebuggles |
I can run it by the UPS service counter today or tomorrow afternoon and get a quote for you Marc. I'm not sure if I will need to box it up or if I can just put a tag on it. Might be able to do the industrial seran wrap thing too, that would keep the package size to a minimum. | ||
| Littlebuggles |
PM sent Purpony, need info for the UPS quote. | ||
| Harleyms |
I am interested in how you are shipping it? I have the same thing sitting around and wasn't sure it was shippable... | ||
| Littlebuggles |
I was going to tape foam wrap around the corners and other potential contact points then wrap the whole thing in industrial seran wrap, I can post a photo when I have it wrapped if UPS says it's okay to ship like that. Frame weighs roughly 30lbs, but lacks a rear subframe, so other model frames will likley have that extra (off-set a bit by the weight of the frame lugs for the side plate and that mounting hardware). | ||
| Littlebuggles |
UPS verified weight of the frame at 30.95lbs. She told me rate is especially high since the frame would ship across the country. Cost wrapped is $82, they charge a little more since they would not be able to run it on the conveyers. Boxed is $74.31 up to 56lbs due to the size. Problem is getting a box it will fit, and then I'll have to pay for it, likely cost the $8 difference just to buy one. | ||
| Littlebuggles |
bump Still thinking somewhere in the range of $135 + shipping but am open to offers. | ||
| Littlebuggles |
Sold Shipping, wrapped as I mentioned above worked out to $49 to the upper West Coast. (Message edited by littlebuggles on April 30, 2012) | ||
| Madmacks |
frame is in my hands, well actually I'm typing with my hands but you know what I mean. Thanks Mike | ||
| Littlebuggles |
I was just thinking I'd better email you, glad it got to you okay! Once the title arrives I'll forward it to you. I assume the other documents got to you alright then as well. |
