G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   S1owner Posted on Wednesday, February 08, 2012 - 09:21 pm:        Ok so i get confused on what i need when i start looking for some of these parts could someone with more expierience chime in it would be appreciated? I am cleaning the control area up what type of throttle housing am i looking for? Thread in cables or push in i assume push in? Can i use my existing throttle tube and but a housing sim to joker machines? Does anyone have a suggestion for a h whole assembly maybe an mx?   Al_lighton Posted on Thursday, February 09, 2012 - 01:12 pm:        I converted my S1 to the newer 99 and later control pods, it was a simple conversion, and they're a little cleaner looking than the older switch pods. The throttle cables change to the newer style. They just plugged right in to the bike harness, IIRC. If you go this route, it's easy to put the Heated grip right side switch pod on (see http://www.americansportbike.com/shoponline/ccp0-p rodshow/17301.html )   S1owner Posted on Thursday, February 09, 2012 - 07:03 pm:        Thanks for the info but i am removing all the electronics from the bars a may use a machined mini switch on each side but thats it   S1owner Posted on Monday, February 13, 2012 - 07:14 pm:        Heres another question on my throttle i know it is two cables is this a push pull or?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: