G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Andersonhdj Posted on Friday, January 06, 2012 - 04:28 pm:        So i have been hunting solutions to my crank problem, suspect a worn pin/brg, have yet to open and inspect. Have done a bit of research that has indicated that the rods from the 883 and the sportster are only 3.9 and 4.25 mm longer respectively. Given that, if the info i have picked up both here and elsewhere, the pistons on the xb9 are raised dome hc units, it may be possible to use either rod with some mods to the pistons if all else fails, notwithstanding the crankpin dia of course?   Buelliedan Posted on Monday, January 09, 2012 - 04:57 pm:        I strongly suggest you call Dark Horse Crankworks (Hoban Bros) in WI to help you with your XB crank. they are the best and they will do it the right way.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: