Author |
Message |
Nwrider
| Posted on Thursday, December 22, 2011 - 05:03 pm: |
|
I am need of the rubber gaskets/seals that go around the gauges. Any one have a couple laying around? They appear to be discontinued, at least my local dealer told me that. Thanks!!! |
Analbeard
| Posted on Friday, December 23, 2011 - 02:13 pm: |
|
Are these them?ebay.co.uk/itm/11-10-1999-2002-Buell-tach-speedo-2 -foam-rubber-rings-/390300525823?pt=Motorcycles_Pa rts_Accessories&hash=item5adfb964ff |
Analbeard
| Posted on Friday, December 23, 2011 - 02:18 pm: |
|
This guy deals Buell parts on Ebay ,check his items for sale out. davidjayuden |
Analbeard
| Posted on Friday, December 23, 2011 - 02:23 pm: |
|
Ebay Item number: 390300525823 not cheap though. |
Nwrider
| Posted on Friday, December 23, 2011 - 06:36 pm: |
|
That's them... If memory serves me correctly I thought they were identical... That photo looks like 2 different gaskets. Thanks. |
Analbeard
| Posted on Saturday, December 24, 2011 - 05:04 am: |
|
http://www.ebay.co.uk/itm/BUELL-SPEEDOMETER-TACHOM ETER-CUSHIONS-X1-S1-S2-M2-S3-GET-EM-NOW-OBLOSETE-/ 280795253138?pt=Motorcycles_Parts_Accessories&hash =item4160b38992 Some more |
Jim2
| Posted on Saturday, December 24, 2011 - 06:29 pm: |
|
Buy from BadWeb sponsor, American Sport Bike http://www.americansportbike.com/shoponline/ccp0-p rodshow/17182.html Note that there are at least two different kinds of foam rings. I needed some for a 2000 M2 factory tach dash and I ended up with one of each kind from two different dealerships. One has an extra flap of foam all the way around. I was able to trim this extra flap with scissors. It then matched the other one and you can't tell the difference. The trimmed part is on the bottom and is not visible. It looks like the American Sport Bike one is the one I didn't need to trim. It looks like the Ebay ones are the ones that need to be trimmed but it's hard to tell with that picture. Don't know which one you need. (Message edited by jim2 on December 24, 2011) (Message edited by jim2 on December 24, 2011) |
Nwrider
| Posted on Saturday, December 24, 2011 - 07:10 pm: |
|
Awesome.. Thanks guys.. I looked on Al's site and didn't find them... Must of missed them. Thanks again guys! |