Author |
Message |
Hogluvr
| Posted on Friday, December 02, 2011 - 09:20 pm: |
|
Gonna put an X1 header on my M2, what do you guys use to plug up the hole for the O2 sensor? |
Buellistic
| Posted on Friday, December 02, 2011 - 09:38 pm: |
|
02 sensor plug from www.knfilters.com ... |
Jcs64
| Posted on Friday, December 02, 2011 - 09:48 pm: |
|
ha, just read a post earlier where someone wanted to swap the other way and was looking to weld on a o2 bung. He would probably love to trade w/ you. Ill see if I can find the post. jeff |
Jcs64
| Posted on Friday, December 02, 2011 - 09:55 pm: |
|
that was hard, it was about 2 posts below yours http://www.badweatherbikers.com/buell/messages/476 23/659835.html?1322868459 jeff |
Hogluvr
| Posted on Saturday, December 03, 2011 - 04:40 pm: |
|
Thanks for the info, wasn't aware they actually made a plug for these, thought I was gonna have to get creative, this is going to be easier than I thought!! |
Slaughter
| Posted on Saturday, December 03, 2011 - 07:17 pm: |
|
The plugs are often a little too deep. You'll have to grind them so they don't stick into the exhaust too far. |
|