Author |
Message |
Wildman4x4nut
| Posted on Sunday, October 09, 2011 - 03:10 am: |
|
I am installing LED turn signals on my Firebolt. Did a few searches and found people have used both the Grote 44893 & a EP-36. Is one better than the other? I am headed into town tomorrow to get the flasher and both are available. Thanks |
Terrys1980
| Posted on Sunday, October 09, 2011 - 08:37 am: |
|
You can find the EP-36 at just about any auto parts store. Or you can do this to your stock flasher. http://badweatherbikers.com/buell/messages/3842/64 5496.html?1312470679 |
Xoptimizedrsx
| Posted on Sunday, October 09, 2011 - 11:13 pm: |
|
I have done the clip wire lead on many flashers on the inside. some you pull out the lead some you cut the wire in the same place. Works perfect every time. I have these on my bikes converted from stock flashers. Before the mod they just buzzed after they flash. total cost Zero and a little spare time. |
|