G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Schmidt452 Posted on Friday, September 09, 2011 - 01:46 pm:        Yes did do a search, I was not able to find the info I was looking for. sorry... I bought a cable and software off ebay, I installed the software on to my laptop with out much trouble I was able to load the drivers for the cable as well. I am able to conect but not in real time I was able to download the eprom and maps, but the only way to reset the tps was to adjust the idle screw and hit check trouble codes. It would then on the main screen have the most current info. With the bike running the tack never worked. However I was able to test the tack, fuel pump and injectors. What am I missing? Bike is a 99X1.   99_x1 Posted on Friday, September 09, 2011 - 02:20 pm:        Upper left hand icon. Click that   Jramsey Posted on Friday, September 09, 2011 - 02:29 pm:        Unscrew the idle adjuster ,go to "functions" and hit Reset TPS, a window opens up and asks reset tps yes/no....hit yes then go to the "ecm run time" screen and screw the idle adjustment up to about 5.0, the bike should now start and idle. Set final idle after engine is warmed up.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: