| Author | Message | ||
     Paul08r |
My front wheel bearings are shot @ 10,000 klic's . Size and spec's , to get at a bearing house? 08 , 1125R Thanks Paul | ||
| Sl33py |
with some of the failure issues i've read of, why not get them from HD/Buell directly? (Message edited by sl33py on September 01, 2011) | ||
| Swalker |
09 CR, front 6005dk, rear 6006 dk. A bearing house can cross them over to another brand if they don't have these in stock. The ones I got are a different brand, but do have the black seal. The dk determines if its sealed, shielded etc. Sealed is what you want. | ||
| Swalker |
May not always be a "dk" that means sealed, depending on brand of bearing. | ||
| Paul08r |
Got HD Buell bearings installed. The old bearing seals are orange. Are black seals an upgrade ? Or black is the faster color ? Paul | ||
| Dennis_c |
The BLACK BUELLS are the faster just ask me I'll tell you | ||
| Jdugger |
Black is the fastest color. | ||
| Froggy |
Yep, why the 1190RS race bikes are white is beyond me! | ||
| Paul08r |
Guess the 08 blue frames must nock a couple of miles off top speed. My buddies all black 09 always pulls away at over 170 mph . Lol. | ||
| Jdugger |
> why the 1190RS race bikes are white is beyond me! They start out black. May is so fast he uses up the black in them. That's why they are getting 6th instead of 1st. Soon as they figure out how to get more black in that bike, it's all over for Suzuki. | ||
| Zac4mac |
Best post ever, Jim | ||
| Mcrbuelligan |
http://www.ukbeg.com/forum/viewtopic.php?f=17&t=14 4 |
