G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Fullauto Posted on Saturday, July 30, 2011 - 11:56 am:        Ordered a new 55 tooth rear pulley for my '99 X1 a few weeks ago here in Western Australia (standard Australian gearing is 29/55) and i rang yesterday to see where it was and the answer was.....discontinued. I've been scouring the internet for an answer to my problem without going to a 61 (I love the tall gearing). I imagine that pre 2004 Oz spec Sportsters will have what I want (after boring out the centre hole to suit of course) but do any of you guys have any other ideas? I see that 2004 on Sportsters have front and rear pulleys with lots more teeth on them. Will they fit the Buell splines? Help?   Buellistic Posted on Saturday, July 30, 2011 - 12:36 pm:        How about a XB12 motor sprocket(38T as OEM is 35T) and primary chain ... That will make your gearing taller !!! Sprocket PN 40290-04 and chain PN 40147-04 ...   Sgtshap Posted on Saturday, July 30, 2011 - 01:59 pm:        by taller you mean lower rpm for same sped, or higher rpm for same speed?   Cyclonecharlie Posted on Saturday, July 30, 2011 - 03:43 pm:        Lower rpm for same speed. A faster top speed.   Fullauto Posted on Saturday, July 30, 2011 - 09:04 pm:        Correct. Might be the way to go Buellistic.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: