Author |
Message |
Chrisrogers3
| Posted on Sunday, July 24, 2011 - 01:43 pm: |
|
Hey everyone well I have come to the realization after buying my 2010 Ulysses that I am just not putting the miles on this one anymore. I have a complete history of the bike. Here are the extras with the bike: Palmer Highway Pegs Polly Heaters Traction Grips Full Hepco bag set (keyed alike) Barkbusters Tall Screen Black rider and passenger pegs 06 Low Gel seat Service manual and owners manual Aux lights Fender extensions Here is all the service work done in the last 2000 miles (Just to show you how well I keep my bike serviced) NEW: Clutch Cable (wasnt broken, just weeped a bit) Front Motor Mount Fork Oil Front and Rear EBC brake pads Engine and Primary oil (Mobil 1 Syn 20w-50) New Exhaust Servo New Plugs and wires New Air Filter THE WARRANTY IS FULLY TRANSFERABLE AND VALID UNTIL JULY OF 2012 (The warranty works very well, the clutch cable, motor mount, and servo were replaced under the warranty through Appleton HD). Here is the bad I have put the bike down on the TRAIL not the road or anything serious, but it has scuffed the side bags. The top bag is also scratched (fell off of the bike). IF THIS IS A PROBLEM FOR A BUYER I WILL THROW MY SIDE BAGS ON THE BIKE FROM MY NEW ULY (IT WILL COST A BIT EXTRA THOUGH). I just put 500 miles on the bike yesterday and it runs perfectly. $4995 buys it AND I will give FREE Delivery to anyone in the Midwest. I will also deliver it anywhere in the country (split the cost). (Message edited by chrisrogers3 on July 24, 2011) (Message edited by chrisrogers3 on July 24, 2011) (Message edited by chrisrogers3 on July 24, 2011) (Message edited by chrisrogers3 on July 24, 2011) |
Cvc
| Posted on Sunday, July 24, 2011 - 10:59 pm: |
|
What is the seat height with the low gel seat? close to an XT? |
Chrisrogers3
| Posted on Monday, July 25, 2011 - 01:35 am: |
|
I think it may be about a half inch higher than an XT. I know there isn't a whole lot of difference from my brand new XT to this one. I have a 30 inch inseam and I can make it work, but I cannot flat foot it. |
Chrisrogers3
| Posted on Thursday, July 28, 2011 - 02:34 am: |
|
Still available...... |
Chrisrogers3
| Posted on Monday, August 01, 2011 - 05:09 pm: |
|
I will take an 1125r or 1125cr in trade, maybe a nice firebolt (12r) as well. I might also be interested in a Corvette, ATV's, or dirt bikes. (Message edited by chrisrogers3 on August 01, 2011) |
Danair
| Posted on Friday, August 05, 2011 - 10:11 am: |
|
Pm sent |
|