Author |
Message |
Mhpalin
| Posted on Sunday, July 17, 2011 - 07:45 pm: |
|
Hi everyone my 2009 1125cr 24000kms with the eebbrr race ecm with stock pipe the blinkers stopped working after I stopped for gas,working fine before that.Nothing works all 4 lights the indercator light on the cluster does not come on all the fuses are okay the switch looks good inside no sign of a short anywhere.Could it be the clustor? thanks for your help Mike |
Mountainstorm
| Posted on Sunday, July 17, 2011 - 08:13 pm: |
|
In before the "blinker fluid" post. Sounds like a loose connection. |
Mhpalin
| Posted on Sunday, July 17, 2011 - 08:45 pm: |
|
No not a loose connection as all the blinkers don't work and the light on the cluster I will have to buy a volt meter as the manual says if there is no current then the cluster is no good.I think I will take the cluster out of my 08r and see if that works will that screw up the cluster. Mike |
Mhpalin
| Posted on Sunday, July 17, 2011 - 08:48 pm: |
|
No not a loose connection as all the blinkers don't work and the light on the cluster I will have to buy a volt meter as the manual says if there is no current then the cluster is no good.I think I will take the cluster out of my 08r and see if that works will that screw up the cluster. Mike |
Mhpalin
| Posted on Sunday, July 17, 2011 - 09:21 pm: |
|
My bad guys the 10 amp fuse for ass looked good no burn marks nothing so just to try I put a new fuse in wow they work now.I am so happy it was such a minor thing,sure beats buying a new cluster. Mike |
Mountainstorm
| Posted on Monday, July 18, 2011 - 01:15 am: |
|
Occams Razor wins again. Glad you fixed it. |