| Author | Message | ||
     Methyman |
Do these work good? Need opinions please. From Buell Parts 1125R/1125CR Anti-Vibration Bar Ends (Message edited by methyman on July 16, 2011) | ||
| Methyman |
http://i41.photobucket.com/albums/e274/methyman/11 25r-1125cr-maintenance-parts-anti-vibration-bar-en ds.jpg | ||
| Duphuckincati |
Cost a bit but work real well. Have them on three bikes now... http://www.vibranator.com/SearchResults.asp?Search =buell&Search.x=15&Search.y=16 | ||
| Methyman |
I was liking these with a throttle lock. Anyone use this type? Thanks Duphuckincati I like those also. Looks like they will work better than the ones from Buell Parts. (Message edited by methyman on July 16, 2011)http://www.manicsalamander.com/products/app-finder.aspx (Message edited by methyman on July 16, 2011) | ||
| Pwillikers |
+1 for Vibranator | ||
| Froggy |
I just picked up a set for my 1125r, the HVMP bar ends work great on my XB. | ||
| Buellmojo |
I use these. http://www.rhinomoto.com/ | ||
| Buellitup |
I have not. But, a few weeks ago I found a post talking about putting bird shot in there. It cost me $5, and it works pretty darn well. As suggested, I put it in a thick zip lock bag before shoving it in there. What I did was I estimated how much shot I needed, and then cut the zip lock bag so that it didn't have that extra plastic around it. I used a lighter to reseal it. You can fit a lot in there. I would bet my little bird shot plastic roll was 9 inches long when all was said and done. It took some shaking/tipping of the bike (I had a friend help me) to get it down in there. | ||
| Methyman |
Buellmojo I like the price which allot cheaper than the Vibranator. Do they work well? I rather purchase something a little more money that is going to work than purchase something cheaper that doesn't work. Then I end up purchasing the more expensive one I should have bought in the first place. | ||
| Kinder |
I use Throttlemeisters. Heavy bar ends with throttle lock. Those vibinators are deff an interesting design. May try those on the cafe when it's done. | ||
| Buellmojo |
Methyman, They made a difference on mine...I did not try or compare any of the others available for my 1125R, so I can only compare the weighted Rhino Moto bar ends to the stock set up...Sorry! (Message edited by buellmojo on July 17, 2011) | ||
| Methyman |
I ordered the Vibranator ones in fear the Rhino Motor would not. I guess I will wait and see when they get here. The Vibranator have a 30 day money back guarantee. | ||
| Zac4mac |
I put a heavy ziplock with 5 Oz #8 birdshot in each bar on Loretta. Works like a dead-blow hammer, no buzz. Oh yeah, it was free since I had the bags and shot laying around. Z | ||
| Buellrider66 |
I put these on and love em, Just enough "grip" to allow you remove your right hand once in a while. Easily overridden with a flick of the wrist. Definitely helps with vibration as well. http://throttlemeister.com/app/inventoryapp/data/category_list/list.html (Message edited by buellrider66 on July 18, 2011) (Message edited by buellrider66 on July 18, 2011) | ||
| Jaimec |
+1 on the Throttlemeisters. |
