| Author | Message | ||
     Bensbike |
I just got the ebr ecm about a week ago and have driven several times. I still have about 4 error codes does anyone else have this? | ||
| D_adams |
I think the cycle count to clear codes is maybe 50. | ||
| Freezerburn840 |
Yes it is common. I think the paperwork that came with the ECM says it may throw codes but will cancel themselves eventually. When you have real codes that are real problems what will happen when you first start the bike the engine light will stay on and momentarily will show a malfunction (or code) on the cluster. My race ecm does not do that. I have to physically go into diag mode and it will show codes. Pretty much nothing to worry about unless its thowing those codes at start up and engine light stays on. | ||
| Bensbike |
yea the sheet that came with it said like 3 0r 4 starts it would go away and im well over that! And yes for me to get the codes I have to enter diag mode my self. | ||
| Freezerburn840 |
you are alright I was irritated too. But I know now what a real issue is the bike will tell you. I am impressed with the cluster and how it tells us, "houston we have a problem" | ||
| Avalaugh |
it took my ecm a long time before they all cleared, you will get a EM light come on if its a genuine problem. Just ride and enjoy. |
