G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Slayer5690 Posted on Tuesday, June 28, 2011 - 09:17 pm:        does any one know where i can get the allen heads that secure the gas cap base on the tank?   Ratbuell Posted on Wednesday, June 29, 2011 - 12:51 am:        Order 'em for a Blast. Should be the same as a tuber.   Jramsey Posted on Wednesday, June 29, 2011 - 09:18 am:        They're metric 5x16x.80 thread. (Message edited by Jramsey on June 29, 2011)   Natexlh1000 Posted on Wednesday, June 29, 2011 - 10:02 am:        You sure they're metric?   Jramsey Posted on Wednesday, June 29, 2011 - 10:23 am:        I'm assuming so as I took one out of my X1 and it screwed in a 5 x .80 die and a 3mm hex key fits perfect where a 1/8" is too large and 7/32" is too small.   Ducxl Posted on Wednesday, June 29, 2011 - 01:19 pm:        Part#AO516.5CSS I bought a set from Precision(a sponsor here).I bought the WHOLE assembly with proper keyed cap.They're METRIC socket flathead screws with a 3mm hex socket. Cheap,but i can't find the recipt.Right here in my hand

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: