G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Avc8130 Posted on Tuesday, June 28, 2011 - 09:44 pm:        ...well in the UK at least... http://www.ukbeg.com/forum/viewtopic.php?f=8&t=102 43   Froggy Posted on Tuesday, June 28, 2011 - 10:12 pm:        At twice the cost of the X2086.1AM kit, it better work!   Avc8130 Posted on Tuesday, June 28, 2011 - 10:16 pm:        Sure...but there are some X2086.1AM kits out there leaking...of course you don't believe that because your bike is super fantastic amazing...but it is reality.   Crowley Posted on Wednesday, June 29, 2011 - 04:09 am:        Yep, I've had the X2086.1AM kits fail too; and I know of a few others as well. I'll keep you posted on how it fares when I'm sent the test kit to try on my bike. As for the price of the Oberon (UK) kit, how do you know the price, it's not been fixed yet, even if it reaches the production stage?   Sportster_mann Posted on Wednesday, June 29, 2011 - 04:49 am:        Probably commenting about the German part, at 300 Euros !   Kicka666 Posted on Wednesday, June 29, 2011 - 05:07 am:        I must have a wednesday bike, 2009 CR the only issue a fuel pressure reg & thats it. I hope I dont jinx myself.   Sprintst Posted on Wednesday, June 29, 2011 - 05:33 am:        dry clutch?   Jdugger Posted on Wednesday, June 29, 2011 - 08:18 am:        > dry clutch? You'd still have the same problem. The leak is coming from the slave cyl, not the oil bath. So far, my solution has been the new kit Froggy mentions and fresh seals biannually. I swap them when I check the tolerances on the clutch pack and I'm in there anyway.   Avc8130 Posted on Wednesday, June 29, 2011 - 08:26 am:        The funniest part: I didn't mean the hydraulic "fix"...I was referring to mechanical clutch conversion. ac   Crowley Posted on Wednesday, June 29, 2011 - 08:40 am:        That was just a lash up made from scrap, just to see if it would would work. (It does) If Oberon hadn't stepped in then a much neater one would have been made with the pivot Tig'd inside the cover.   Avc8130 Posted on Wednesday, June 29, 2011 - 08:47 am:        I wasn't criticizing if it came across as that. I was HIGHLY impressed with the prototype. Good for them to see a problem, design a solution and BUILD IT. ac   Mcrbuelligan Posted on Wednesday, June 29, 2011 - 09:06 am:        the parts are being road tested at the moment to see if any parts fail.   Crowley Posted on Wednesday, June 29, 2011 - 10:53 am:        AVC, no offence taken at all I'm the first to admit it was a bit 'Heath Robinson'. I didn't want to waste any time making it look pretty if it wasn't going to work. The only drawback being, it did require the forearm of someone who's been a rock climber for nearly 40 years, to operate it

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: