G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Swoop Posted on Thursday, June 23, 2011 - 04:57 pm:        I am making some fiberglass side fairings and a belly pan. Does anyone know how much clearance there should be from the ground to the bottom of the belly pan? As it sits right now it's about an inch lower than the lowest point on the KEDA RT-2.   Jdugger Posted on Thursday, June 23, 2011 - 05:16 pm:        Enough stuff don't drag at full compression...   Rodrob Posted on Thursday, June 23, 2011 - 05:29 pm:        As tight to the muffler and exhaust as possible. Mine scrape on the track all the time and they are about an inch lower that the muffler.   Sl33py Posted on Thursday, June 23, 2011 - 06:55 pm:        Will the Buell bellypan fit around the RT-1/RT-2? (same just with dual tips right?)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: