Author |
Message |
Nwrider
| Posted on Monday, June 20, 2011 - 07:03 pm: |
|
I bought my x1 with an led taillamp with smoked lens. Just looking at photos it appears it may be shorter than stock. Does someone have a stock one off their bike they could measure the depth on? Front to back on the top-side. Working on something and I want to make sure a stock lamp will fit it. Thanks! |
01x1buell
| Posted on Monday, June 20, 2011 - 07:14 pm: |
|
i hope that the stock lamp fits i know what your doing.. so when you going to have a pic for me ????,, i would measure mine but it is not here right now.. |
Nwrider
| Posted on Monday, June 20, 2011 - 07:32 pm: |
|
If everything goes smoothly we should have it finished this Saturday. |
01x1buell
| Posted on Monday, June 20, 2011 - 07:35 pm: |
|
kick ass man if no one responds with light size i will give you size myself my bike should be back by thursday i hope.. the header stud has to be milled out of head its that f ed up.. |
Nwrider
| Posted on Monday, June 20, 2011 - 07:47 pm: |
|
Ouch... that sucks. Need the measurement from the mounting plate to the farthest rear edge. I thought I had all my original parts but when I looked the rear lamp had been pilfed off the fender. Thanks! |
01x1buell
| Posted on Monday, June 20, 2011 - 07:57 pm: |
|
i will do my best when get the bike back if someone else has not helped you out yet.. goodluck and can not wait to see the finished product. |
Jramsey
| Posted on Monday, June 20, 2011 - 08:00 pm: |
|
I came up with this.
|
01x1buell
| Posted on Monday, June 20, 2011 - 08:11 pm: |
|
nice james hopefully that will help him out.. |
Nwrider
| Posted on Monday, June 20, 2011 - 08:18 pm: |
|
You are the man Jramsey.. Thanks. Looks like the aftermarket one I have is the same size and curves the same on the topside. Thanks again! |