Author |
Message |
Nwrider
| Posted on Thursday, June 16, 2011 - 08:12 pm: |
|
I do not know how difficult these are to find but it sounds like this may be the route I want to go. Race ecm vs ECMspy and my stock ecm? Your thoughts? This may be a stupid question but it sounds like you can tweak the race ecm with ECMspy as well. So.. how would I know a race ecm hasn't been monkey'd with? Rendering it the same as a tweaked stock one. |
01x1buell
| Posted on Thursday, June 16, 2011 - 08:16 pm: |
|
good luck trying to find a race ecm..... i tried all over i went with the ecm spy and some help from fellow buellers and i l love the results.... just wait a little bit and i am sure there will be some more response to this.... did you try searching the site? there are plenty of threads on this subject . |
Nwrider
| Posted on Thursday, June 16, 2011 - 10:14 pm: |
|
I just did... general consensus seems to be don't waste time lookin for a race ecm. Think I saw the cable on als website. Orderin one up! |
Nwrider
| Posted on Saturday, June 18, 2011 - 03:49 pm: |
|
Cable is on its way... now I just need a copy of ECMspy and possibly a good map to use as a starting point. Don't have my exhaust yet.. just an econowinder. The more I ride the more I get used to what power it has. Feels like it has less power then when I bought it but I know I am just getting used to it. I have nothing to compare it to but it doesn't seem to make much power under 5000rpm. Stock I thought this bike should lift the front wheel or at least make it light using throttle only.. am I wrong? Maybe its just cuz I am fat... hhehhe.. 210lbs. |
01x1buell
| Posted on Saturday, June 18, 2011 - 03:52 pm: |
|
i am 175 and my bike did not lift front wheel up stock unless you used the clutch to pop it up,, now with the race maps it comes up 6 inch or so under full power through the gears. |
01x1buell
| Posted on Saturday, June 18, 2011 - 03:55 pm: |
|
when i bought my cable it came with a copy of ecmspy.. pm me and i will send you a copy of ecmspy. and maybe a race map if your nice. my map is not finely tuned just a base map... you should also down load megalogviewer to do data logging. |
Nwrider
| Posted on Saturday, June 18, 2011 - 04:04 pm: |
|
Nice... pm sent. |
Nwrider
| Posted on Saturday, June 18, 2011 - 08:38 pm: |
|
Wow... after reading the tuning guide this isn't as scary as I thought. Look forward to the datalogging fo sho. |
01x1buell
| Posted on Saturday, June 18, 2011 - 08:42 pm: |
|
yeah with the guide and a little first hand help it is not bad at all.. the guys on badweb here helped me out alot |
Azrael_cervale
| Posted on Saturday, June 18, 2011 - 08:48 pm: |
|
Something I found awhile ago. ECMSpyhttp://www.adampascoe.com/ECMSpy.html |
Nwrider
| Posted on Saturday, June 18, 2011 - 10:46 pm: |
|
Why thank you kind sirs... I believe I have everything I need to get myself in trouble |
Nwrider
| Posted on Saturday, June 18, 2011 - 10:50 pm: |
|
Arael.. Port Orchard? Almost a neighbor! Thanks again. |