Author |
Message |
Burckman
| Posted on Friday, June 10, 2011 - 12:16 am: |
|
i installed a new motor and cannot seem to fined the other plug for my nuetral indicator switch can anyone help me with a picture and instructions on where it may be |
Rays
| Posted on Friday, June 10, 2011 - 07:58 am: |
|
The neutral switch is located behind the drive pulley at about 2:30 if you imagine a clock face overlaid on the pulley. The connector on the switch is a single brass pin - this is a picture of the switch so you can recognise the connection:
|
Terrys1980
| Posted on Friday, June 10, 2011 - 09:02 am: |
|
|
Burckman
| Posted on Monday, June 13, 2011 - 05:20 pm: |
|
yeah thats it i cannot figure out where the other connector is that plugs into the nuetral switch connector |
Terrys1980
| Posted on Monday, June 13, 2011 - 05:40 pm: |
|
It should be right by the ignition and cam sensor connectors. It's just a single wire bullet connector. The switch grounds it to complete a circuit. |
Badgerboi21
| Posted on Thursday, May 10, 2012 - 02:17 pm: |
|
I see this is an old thread but recently my neutral indicator stopped working. I believe my neutral switch went bad. I've read quite a few threads regarding the location of the switch but I'm wondering how difficult of a fix this is. I have a 2000 Cyclone. Thanks |