G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Scm2 Posted on Thursday, June 09, 2011 - 11:58 am:        I'm having an issue where when I crack the throttle open it bogs down for a half of a second then accelerates. I have gone through the carb and cleaned it and the jets are a 45 and a 190 with a Dynojet Thunderslide kit. I have noticed when I have the air filter off and when I hit the throttle the accelerator pump sprays fuel but it hits the slide and sprays back at me. After a good ride the air filter is saturated with gas as well which leads me to believe that the slide is not functioning properly. I have raised the slide and it moves freely and lowers back down slowly. It runs fine other wise it’s just when I hit the throttle it has an issue. Thanks for your help!   Duceater Posted on Thursday, June 09, 2011 - 12:15 pm:        i wonder if your float is set too high or is not closing all the way. You cold have gas overflowing into your carb at idle. when you have the air filter off, do you see gas coming out of one of the holes when the bike is just idling (not the accelerator pump)? does it run a little rough if you lower the idle speed? I don't have a tach, so I'm not sure what idle you'd want to lower it too. I hope that makes sense. let me know if it doesn't and I'll try to get more specific.   Duceater Posted on Thursday, June 09, 2011 - 12:21 pm:        actually if your float isn't shutting off the incoming fuel, you won't need to have the bike running to see the fuel entering the velocity chamber (is that what its called?). Just take your air filter off without the bike running and see if fuel is leaking into there.   Scm2 Posted on Thursday, June 09, 2011 - 06:11 pm:        No it's not filling up with gas. Everything looks to be normal.   Jim2 Posted on Thursday, June 09, 2011 - 06:49 pm:        I can't remember for sure but I think the test for the slide is to use finger and it should raise with very little pressure and return quickly when released. The manual test is in the FSM somewhere. Make sure the accelerator pump nozzle isn't loose. I think it screws in. If so it's possible it could be pointed wrong.   Hellraged Posted on Thursday, June 09, 2011 - 09:04 pm:        i had problems with my carb and noone could figure it out. took to a good shop and they found something noone else did. It was missing the grommet around the main jet. check that maybe? im not mechanic btw lol

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: