Author |
Message |
Fugitive81
| Posted on Monday, June 06, 2011 - 11:29 pm: |
|
just wondering if anybody can help me with the install of my damper with some pictures thx |
Jdugger
| Posted on Tuesday, June 07, 2011 - 08:15 am: |
|
What's got you tricked? The little "u" shaped part mounts to the underside of the steering head where the fairing attaches. It "points out". You will, or at least I did, have to remove a portion of the plastic wire guide under there. Otherwise, it goes on fairly predictably. |
Fugitive81
| Posted on Tuesday, June 07, 2011 - 08:22 pm: |
|
perfect thx |
Carbonrider
| Posted on Wednesday, June 08, 2011 - 02:05 pm: |
|
My TTX36 Grüße aus Ostfriesland Hans |
99buellx1
| Posted on Wednesday, June 08, 2011 - 02:28 pm: |
|
Hans, Fugitive81 was referencing the steering stabilizer. |
Stirz007
| Posted on Wednesday, June 08, 2011 - 02:30 pm: |
|
There should have been instruction sheets provided with the damper if you bought it from our friends over there at HeeBeeArr. At least mine came with some. If not, they may be able to provide you a set. If you read them and go slow, you shouldn't have any problems. Loose fit, check, adjust, tighten (with loctite). Took me less than an hour to mount up. (I did have the fairing off at the time, which made it easier for sure). |
Fugitive81
| Posted on Wednesday, June 08, 2011 - 03:34 pm: |
|
i got it np now thx but that shock is very nice i would like to find a nice drag shock for mine |
|