G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Mbsween Posted on Thursday, June 02, 2011 - 02:25 am:        Okay, So you may recall last year I had an issue with the front motor mount that resulted in a 1250 kit, and I figured, as long as I'm in there, I'll do the oil pump drive gear. Well I have her all apart and the manual tells you to remove the pinion gear an then the oil pump driver gear. it doesn't mention a puller or anything. The bike is an 01 X1 with approx 48K miles on it. The gear doesn't look bad, but I do have the new one and would like to change it out. Am I missing something easy or do I need to get a gear puller or "coax" it out in another way? The bolt on the shaft is off. I took the picture off prior to that step. Also I'm new to Harley motors, so I want to make sure I have the cam line-up correct. It's just the dots, combined with the pinion gear which is fixed to a shaft with a key correct? Does this look close. I'm beginning to miss shim under bucket setups !   Kilroy Posted on Thursday, June 02, 2011 - 06:46 am:        This is how the cams should line up   Brinnutz Posted on Thursday, June 02, 2011 - 09:02 am:        I used a small puller to get mine off.   Sportyeric Posted on Friday, June 03, 2011 - 11:44 am:        I had the same question when I did mine. Yes, a small puller pops it loose easily. New one goes on without fuss. (I was all set to heat it.)

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: