| Author | Message | ||
     Pepperk496 |
I will pay for some help! I'm not afraid to do the work. I do all of my own maintenance anyways. I'm just a little worried that I will miss a tip or trick without an experienced hand in the motor. Already talked to Jim at JTS performance, he says "just do it yourself!" | ||
| Jcjohnson33 |
Yeah if you can do it yourself do it. Father-of-an-era said he talked to the dealer and they told him it would cost between $700-$1000 that is just way to much | ||
| 1_mike |
If you do your own maintenance anyway...why are you concerned ? Just go at it. Go slow, be careful, use your head. Watch for tight harness/wires as you rotate the engine. Other thAn that..."common sense" is your friend. Mike (Message edited by 1_mike on June 01, 2011) | ||
| 2008xb12scg |
You need help as in somebody who's done this before or just another set of hands? If you need another set of hands from somebody who's no mechanic send me a pm. | ||
| Motorcyclemike |
What is it that you actually want to do? |
