| Author | Message | ||
     Mhpalin |
Hi everyone it was worth the wait it sounds great and it runs great with the eb race ecm,here are some pics. Mike  | ||
| Mhpalin |
another pic  | ||
| Mhpalin |
and another  | ||
| Stevek1125r |
Looks nice! | ||
| Lastonetherebuys |
maybe its because I am used to the way the stocker looks under my R but most of the aftermarket exhausts out there make the bike look rather tall, not saying that they look bad at all, just strange in their own way. | ||
| Mhpalin |
okay update guys forgot to put my earplugs in after getting gas holy s---t is the pipe loud works good on the dog next door that chases the bike pull the clutch in give it a rev no more dog.Time to ride again maybe the CR this time Mike | ||
| Kenm123t |
Once the big stock muffler is off you realize how compact the 1125 is | ||
| Freight_dog |
I have always liked the minimalist look of an 1125 with an aftermarket can. That is why I was never a fan of the look of the Torque Hammer. They were trying to maintain the aesthetic of the stock exhaust but didn't pull it off so well. I've scared off deer with the stock exhaust and the same technique. These big v-twins are just loud bikes and an open exhaust is just ridiculous. | ||
| Swoop |
Paint or Powder coat????? | ||
| Jrfitzny |
I was thinking about getting one too. It looks like there's a lot of space between the bottom of the engine and the exhaust. Will this fit with the flexiglass bellypan? | ||
| Mhpalin |
I used paint Mike | ||
| Mhpalin |
I don,t think a bellypan will fit it is a inch lower then the stock pipe and I had to change the brackets for the lowers Mike | ||
| D_adams |
Jrfitzny -- It should fit. The pipe is 2.5" and there's about an inch between it and the motor when mounted, maybe a little more. Should be the same as stock at the lowest point for ground or bellypan clearance, so if it fits with the stock exhaust, then it should fit fine with these. | ||
| Swoop |
I'm thinking about making a fiberglass belly pan when I get my rt 2. Dean how wide is a exhaust at the back? | ||
| D_adams |
7" wide. I can extend the tips out some if you want, but they normally fall within the line of the muffler body. | ||
| Swoop |
Nah Keep it the normal way. | ||
| Evc17 |
Hey mike, it sounds great!! Mike did you take the R or the CR to the rally (poker run) today? Ok two questions. Not a very nice day.How was the ride,did you have to wear your elec. gear?  | ||
| Mhpalin |
I rode the R today Ed and yes I wore the gerbing it was 3c in the morning and warmed up to 8c and rain too at least it didn't snow Mike | ||
| Charles9000 |
Hey Mike, I've been looking at bags for my 1125R. What kind of bags are on your bike? | ||
| Mhpalin |
Charles those are the buell bags I have the saddle and tank as well I don't think you can get them anymore.They work okay I am sure you can get better after market ones. Mike |
