G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Xenox Posted on Sunday, March 20, 2011 - 06:09 pm:        I just installed a VDO tach and am trying to get some ballpark reference points. Speed versus rpm in a particular gear, I'm running stock tires fwiw. If you can help me that would be great, I'm not getting a good feeling from this tach, l could be confused coming from a v twin.   Ezblast Posted on Monday, March 21, 2011 - 01:01 pm:        Twin tach will not work on a single without massive modifications. That Trail Tech I got sure works nice though. EZ   Xenox Posted on Monday, March 21, 2011 - 01:22 pm:        EZ, you are so right, I'm sending VDO back because it's not working properly. it is listed as a 1 cylinder or 2 cylinder use, however the 1 cylinder is supposed to be a 2 stroke, I found this out after I ordered it the description was a little ambiguous on the website.. I should have listened to you from the start I ordered a TTO. Note to self pay attention to what E Z is telling me. Thanks again!   Bosephus Posted on Sunday, May 22, 2011 - 11:22 am:        Not to hijack the thread but Ez I also purchased the TTO. What settings did you use mine is all over the place sometimes close to actual idle then off by around 300 RPM ??? I am currently set to ppr 1.0 lo and slo.   Ezblast Posted on Sunday, May 22, 2011 - 04:29 pm:        set to 0.5 and fast, and cut out any excess wire so it is not reading its own echo as well. Then just twist together and tape up - works great for the every day. EZ

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: