G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Skifastbadly Posted on Monday, May 16, 2011 - 02:38 am:        Long story, most of you probably know it. Here's what I have left before I resort to eBay: Frame Swingarm ECM Forks (but the springs are gone) Rear brake complete assembly Front brake: cable and caliper Seat (black and barricade orange) BeaverTail assembly Headers Muffler Hurry, hurry, hurry, my wife is making unpleasant noises about needing to park in the garage again. Will give you everything listed plus four quarts of Screaming Eagle oil if you take the wife too. (Message edited by skifastbadly on May 16, 2011)   Pontlee77 Posted on Monday, May 16, 2011 - 03:39 am:        what is the condition of the swing arm? What is the Beaver Tail assembly? could you post some pics? Thanks.   Jrfitzny Posted on Monday, May 16, 2011 - 05:33 am:        Is this seat the low seat? I'm interested in buying it for my dad's Uly. Send me a PM with a price (including shipping). Do you accept paypal? Thanks.   Dbraun30 Posted on Monday, May 16, 2011 - 08:22 am:        I know you don't have them listed but do you have the footpeg brackets? Dibs if you do.   Nillaice Posted on Monday, May 16, 2011 - 08:23 am:        pics of the wife? LOLz   Dbolemiss Posted on Monday, May 16, 2011 - 11:52 am:        Great seller, He has been helping me piece back together my bike.   Skifastbadly Posted on Monday, May 16, 2011 - 12:21 pm:        Ah, questions, questions questions flooding the intertubes: The condition of the swingarm is, as far as I can tell, dusty. It is also oily inside. Normal wear for a bike that had 30K miles on it. No dents, cracks, or defects I know about. The beaver tail assembly includes the beaver tail, the passenger grips, etc. I'll try and get a photo tonight. The seat is the orignal seat for the 07, not the low one. Peg brackets are gone, sorry.   Andymnelson Posted on Monday, May 16, 2011 - 12:25 pm:        Pm sent re: exhaust.   Jasonb Posted on Monday, May 16, 2011 - 03:26 pm:        Still have the ECM?   Balloyd66 Posted on Monday, May 16, 2011 - 05:49 pm:        do you have the right foot peg mounts frame piece? And do you think it would fit an '09 XT? sorry, just saw the post about the peg brackets. never mind. thanks anyway. (Message edited by balloyd66 on May 16, 2011)   Videoninja Posted on Monday, May 16, 2011 - 06:45 pm:        Front fender (beak)?   Skifastbadly Posted on Monday, May 16, 2011 - 07:12 pm:        Videoninja: Beak is gone, thanks for your interest. Jason: The ECM is available.   Ourdee Posted on Monday, May 16, 2011 - 09:06 pm:        Brake foot lever, brake hand lever, clutch lever, shift lever with linkage all for $30.00 shipped?   Wjcunning Posted on Tuesday, May 17, 2011 - 11:42 am:        Got any orange body parts left?   Chrisrogers3 Posted on Tuesday, May 17, 2011 - 12:31 pm:        PM sent on the forks   Skifastbadly Posted on Tuesday, May 17, 2011 - 02:50 pm:        You guys wanted some pictures, so look here: http://s176.photobucket.com/albums/w191/SkiFastBad ly/07%20Uly%20Parts%20Bin/   Rkc00 Posted on Tuesday, May 17, 2011 - 03:45 pm:        No photos of the wife???   Skifastbadly Posted on Tuesday, May 17, 2011 - 04:30 pm:        Here you go. Keep her until the menopause is over.   Hughlysses Posted on Tuesday, May 17, 2011 - 05:06 pm:        Skifastbadly- any chance you have an extra exhaust valve actuating cable?   Skifastbadly Posted on Tuesday, May 17, 2011 - 05:16 pm:        I might, Hugh. I haven't sold it. But the bike came back with some assembly required and there are cables laying all over the place. Got a picture or a diagram I could look at?   Hughlysses Posted on Tuesday, May 17, 2011 - 06:46 pm:        I don't have a picture handy, but it should be pretty easy to spot. It looks similar to the throttle cables, except it has a 90 bend in the sheath made of stainless steel tubing at the muffler end. There's an adjuster built into the sheath near the airbox end. Thanks for checking.   Skifastbadly Posted on Tuesday, May 17, 2011 - 09:53 pm:        Hugh if this is it: Them PM me your address and I will send it free of charge to you in recognition of your outstanding effort to document your engine transplant. (Message edited by skifastbadly on May 17, 2011)   Hughlysses Posted on Wednesday, May 18, 2011 - 05:04 am:        Craig- that's it. Wow, thanks very much for the freebie! PM sent.   Skifastbadly Posted on Thursday, May 19, 2011 - 02:31 pm:        Ok an update: GONE: Beaver tail STUFF I FOUND OR FORGOT TO MENTION: 07 Shop Manual Chin fairing Instrument cluster STUFF THAT INTEREST HAS BEEN INDICATED IN BUT HAS NOT SOLD: ECM Swingarm Front forks Wife   Fordhotline Posted on Friday, May 20, 2011 - 11:45 am:        What is color and condition of chin fairing? Thanks Is Wife Sold yet?   Ggtd Posted on Friday, May 20, 2011 - 02:59 pm:        looking for seat lock,license plate mount(ie upper fender) and related plastic. any luck.   Skifastbadly Posted on Friday, May 20, 2011 - 11:24 pm:        Ford: Here are some photos of the chin faring which is gray and black. And dirty. It is, after all, off a Uly. I can detect no structural issues whatsoever. Ggtd, sorry, that stuff is gone.   Millersv650 Posted on Thursday, May 26, 2011 - 03:12 pm:        I will give you $60 bucks including shipping for the muffler, If it is still available.   Murf2 Posted on Thursday, May 26, 2011 - 09:50 pm:        SFB, I PM'd you over on ADV. I need some small parts. Let me know what you got. I need handlebar controls, clutch lever, and maybe a kickstand, if you have any of it. Thanks, Murf   Ratbuell Posted on Friday, May 27, 2011 - 12:09 am:        Um...what kind of recommended maintenance schedule does the wife have? (Message edited by ratbuell on May 27, 2011)