G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Aj2010 Posted on Sunday, April 24, 2011 - 10:19 am:        Can anyone confirm that 6.2 is in fact the latest revision for the cluster? I've seen a 6.3 mentioned on here some place. The servicing dealer that I have gone to with the CEL/LFL issue, indicated that my 6.1 and cal 1.0 is the latest version.   Brumbear Posted on Sunday, April 24, 2011 - 11:03 am:        warming my bike works fine for my lf/cel problem I honestly never checked as the glitch goes away in 5 min.   Zac4mac Posted on Sunday, April 24, 2011 - 11:49 am:        An series of e-mails I got from an anonymous Buell engineer said the latest IC firmware was 6.2 for 08-09 and 7.1 for the 2010 MY. The time frame was early December 2009 so I doubt there is a newer Rev. Remember, 2 distinct failure modes - 1)LFL/CEL at startup, both go out as bike reaches OpTemp(151F ?). replace IC if earlier than 6.2 or 7.1 2)LFL/CEL come ON as bike reaches OpTemp, may go out later as frame/tank heatsoaks. replace fuel pump/sensor ass'y. Zack   Reducati Posted on Sunday, April 24, 2011 - 02:01 pm:        zac...my is #2..is there any harm in just doing nothing?   Zac4mac Posted on Monday, April 25, 2011 - 10:39 am:        Both lights and the associated DTCs are "info only" AFAIK. Just ignore them if you can, I did for a year or so..

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: