G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Greekmoose71 Posted on Saturday, April 02, 2011 - 02:36 am:        I have a 2002 blast and I am having an intermitted starting issue with it. The bike is seeming to have some kind of clutch issue because the bike will start and run perfectly but only if i hold the clutch handle in a certain way or in a certain position. Any help would be greatly appreciated because I don't wanna get stuck having to leave my bike somewhere cause it will not start..   Britchri10 Posted on Saturday, April 02, 2011 - 11:51 am:        It could be the clutch safety switch. To disable this, flip one of the diodes in the fuse box. (I'm not sure which one but there are only two). BEWARE: This will disable the safety switch so you will be able to start your bike when in gear without pulling the clutch in. There are full instructions somewhere in the Thumper section. Good luck! Chris C   Ezblast Posted on Saturday, April 02, 2011 - 03:50 pm:        The center diode - EZ   Gearheaderiko Posted on Saturday, April 02, 2011 - 08:07 pm:        Clutch Diode safety switch link: http://www.badweatherbikers.com/buell/messages/201 64/55319.html

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: