| Author | Message | ||
     Tougelabs |
I have seen several bikes running this lower but I am still unable to find a company that makes it. Anyway I just purchased my 08 with 400 miles and it has the add on buell fairings but as I said before I'm just a big fan of the lower that mates up to the stock ducts. Figured I could sell these and pick up the lower. Any info would greatly be appreciated, the sooner I have one the sooner I can start fabricating up a 08-10 cbr1000rr taylormade style exhaust  Thanks ! | ||
| 99buellx1 |
Flexi-glass. See here: http://www.badweatherbikers.com/buell/messages/290 431/621664.html?1300416610 | ||
| Tougelabs |
Nobody makes a pan that it is kick stand compatible ? | ||
| D_adams |
 There's that one, but I dunno how much it is. | ||
| Xnoahx |
catalyst racing composites also makes one that mounts up and looks good with the stock pods. Someone on here had that and it looked good. | ||
| 99buellx1 |
Generally no. You will need to customize them. | ||
| Jaimec |
http://www.trojan-horse.co.uk/prods/267.html | ||
| Jdugger |
> Nobody makes a pan that it is kick stand compatible ? There's no sense in a pan with the kickstand in the OEM location. | ||
| Hootowl |
Unless you're just going for looks and not fluid retaining capacity. The pan pictured above would likely not pass tech inspection. | ||
| Bob_thompson |
Joe (Tougelabs), check the picture in my profile for what a Catalyst Composites full fairing looks like. You do have to make a cutout for the kickstand, stock muffler, make mounts and paint but its relatively inexpensive at about $230.00. I also used Dzus connectors for easy removal to do maintenance. Fiberglass also so its tough and very light. Bob | ||
| Jdugger |
> The pan pictured above would likely not pass tech inspection. That's my thought, too. The Buell holds 3 quarts of oil and at least that much coolant. I bet that pan wouldn't... | ||
| Stirz007 |
"Nobody makes a pan that it is kick stand compatible?" The FBW lower is kick stand compatible, but may or may not pass tech. Will post photos this evening when I get home. JM | ||
| Rex |
 I saw this one, and would love to do this to my CR. REX | ||
| Rex |
I like how it covers up the pods and makes it one continuous one from top to bottom. I like the belly pans, since they cover up the extra space the custome exhausts do not fill up. | ||
| Tougelabs |
OK so it looks like I will pick up the catalyst one. Thanks guys for everything ! Anyone need stock buell fairings ? | ||
| Jules |
I saw this one, and would love to do this to my CR. REX You can - take a picture of your CR, open Photoshop, add on the fairing from a (I think GSXR1000), photoshop a XB12 back end on and away you go.... just like that one. Of course you'll be disappointed when you go out in the garage and see it's not real... | ||
| Theothers2t |
How much are you asking for the Buell lowers? Are you able/willing to ship to Wisconsin? | ||
| Tougelabs |
I'm willing to drive them to you if the price is right shipping is no problem. I posted up a link in the classifieds section with contact info and asking price. |
