| Author | Message | ||
     Echo15 |
Have those of you who have installed the high bar kit needed to make changes in suspension set-up? I'm doing it this week & wonder what to expect in handling changes. | ||
| Chessm |
the high bars put less weight on the front than the clubman's. i had to remove preload from the front and add some to the rear. | ||
| Brumbear |
The front will get a bit lighter I also took a little off the front but I did not have to add to the rear | ||
| Usanigel |
Watch out for the run of the throttle cables so they don't bind. | ||
| Brumbear |
 turn the bars all the way left open throttle and release make sure they don't bind even if they work smooth with bars centered | ||
| Oyrider |
I didn't change my suspension settings, they seem good, but the front end definitely gets light under power. It makes a steering damper seem like a good idea. |
