| Author | Message | ||
     Tom_c |
How would I wire rear signal lights only, I didn't want front signals, however, the rear signals will not work until I hook up the front; what wire can hook to which wire to make this happen???????? Thanks, Tom C | ||
| Jdugger |
You will need a resistor between the leads for each front blinker. You can take a guess at what the values should be by measuring the DC resistance of each blinker. | ||
| Jules |
How would I wire rear signal lights only OK I'll bite - WHY would you want to do that? | ||
| Boogiman1981 |
just grab some smoked out stick ons like i did no one sees us anyways and i can always tell the cop "see i have blinkers" | ||
| Lastonetherebuys |
Check out watsen designs. they make flush mount lights that are insanly bright and have a resistor built into them look B/A with a licence plate relocator. | ||
| Kinder |
I have seen the http://www.watsendesign.com/ and its very good quality. (Message edited by kinder on March 26, 2011) | ||
| Zac4mac |
I want to see some "in person". (Message edited by zac4mac on March 26, 2011) | ||
| Boogiman1981 |
really a bill+ for blinkers? | ||
| Swoop |
here are th blinkers i got from ebay, the middle LEDs are brake lights. http://www.youtube.com/watch?v=vJJZ0E4SOBw&feature =player_profilepage | ||
| Ohsoslow |
you have to ohm out the resistance of the front signals and wire in the appropriate resistor |
