G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Donald Posted on Monday, October 20, 2003 - 05:43 pm:        I just pick up my 12R from Jardine today. Its putting out just under 92hp with a 6 1/2 hp increase for most of the rpm range. Plus about 13 lbs. of wieght saved. The bike will thottle wheelie.The bike sounds great it has a nice tone to it, not too loud. I have dyno sheets before and after. But no way scanning them. If someone has the abilty to scan and post let me know.   Shazam Posted on Monday, October 20, 2003 - 05:50 pm:        I sent them an E-mail requesting info on this..... I have yet to hear back from them. Can you share anything else about the setup? is it a slip-on or a full header system? do you know what they are going to $ell for? or when they may be available to the rest of us. Take some pictures! Someone jump in here and help get this info posted...... Anyone know if the twelve headpipe is available to the public yet?   Donald Posted on Monday, October 20, 2003 - 06:23 pm:        The pipe is just a slip on. I beleive it's available now. It looks great, I have the polished aluminum finish. I also think that Jardine is going to have a carbon fiber and titanium finish available. I will take some pictures today. But, I do not know how to post them. If your e-mail address is available on Bad Web I will send them to you.   Bads1 Posted on Monday, October 20, 2003 - 09:10 pm:        Donald send me some pics.Also how much for the set-up??????   Buckinfubba Posted on Monday, October 20, 2003 - 10:21 pm:        Not that I am discounting anything here but. I'd lay odds it is the same can they throw on evrything else that has a header. In other words a pipe with a baffel tube and some packing and a Big brand name. Now if I am wrong I will stand corrected and eat my words.   Bads1 Posted on Monday, October 20, 2003 - 10:34 pm:        Bubba most likely your right but still interested seeing that they never had anything offered for BUELL in the past.   Donald Posted on Monday, October 20, 2003 - 11:06 pm:        Bads1-I just e-mail you some pics. As far as set up just race ecm and k&n filter. Bubba, I also belive your right. But it seems to work pretty good.   Bads1 Posted on Monday, October 20, 2003 - 11:13 pm:        Donald how much $$$$$$$   Bads1 Posted on Monday, October 20, 2003 - 11:15 pm:        By the way the muffler looks alot smaller then anthing else they produce as far as length.   Donald Posted on Monday, October 20, 2003 - 11:24 pm:        Bads1-I just pick up the bike today. I am not sure what Jardine is going to sell them for. I can call them tomorrow and let you know.   Buckinfubba Posted on Tuesday, October 21, 2003 - 08:47 am:        donald What do the brakets look like that let you bolt uo the chin spoiler. I hope the pipe works, I really do because we need more affordable choices. Did they give you dyno numbers   Donald Posted on Tuesday, October 21, 2003 - 11:50 am:        Bubba-The new chin spoiler bracket bolts to the idler pulley on one side and on the other side the bracket bolts up the kickstand. Jardine gave me a before and after dyno run sheet. I just don't have a scanner to display it.   Shazam Posted on Tuesday, October 21, 2003 - 12:01 pm:        My curiosity stems from the fact that I have a nallins 1200 convcersion on my 9, and was wondering if there are any alternatives to the force set-up with regards to header diameter. the XB12 headpipe is not available to the public, so I can't even try that with a slip-on. I haven't seen anything else yet. guess I'll be putting the force back on when I get it back   Daves Posted on Tuesday, October 21, 2003 - 12:57 pm:        Bad, Can you put the pictures up here? Ride to the edge! Dave   Bads1 Posted on Tuesday, October 21, 2003 - 05:13 pm:        Daves You have email   Shazam Posted on Tuesday, October 21, 2003 - 05:38 pm:        Dave, can you?   Darthane Posted on Tuesday, October 21, 2003 - 06:41 pm:        Sam? Any luck digging those things up? <~~going to Japan Friday morning.   Shazam Posted on Wednesday, October 22, 2003 - 10:23 am:        my apologies Bryan, they've yet to turn up, and may not have made the move......I know where to find you if they do.....I honestly don't know where they have gotten to! how long in Japan? Long enough to make another set?   Daves Posted on Wednesday, October 22, 2003 - 10:41 am:        Heck I don't know how to do all that fancy computer stuff. I have the picture but need someone to email it to that knows how to post a picture. Who can help us out? Ride to the edge! Dave   Spooky Posted on Wednesday, October 22, 2003 - 10:48 am:        Dave, Send it to me, I'll get everything resized if needed and post them. Eric spooky@b-last.com   Shazam Posted on Wednesday, October 22, 2003 - 11:56 am:        same here, can do.   Daves Posted on Wednesday, October 22, 2003 - 12:03 pm:        You have mail Sam. Dave   Shazam Posted on Wednesday, October 22, 2003 - 12:16 pm:        OK,   Bads1 Posted on Wednesday, October 22, 2003 - 01:21 pm:        Thanks Daves and thanks Shazam I couldn't get them to post.   Glitch Posted on Wednesday, October 22, 2003 - 01:55 pm:        Wow, that pipe is tiny... Makes the XB look big!   Usapitbullz Posted on Wednesday, October 22, 2003 - 03:42 pm:        Looks good!   Bads1 Posted on Wednesday, October 22, 2003 - 04:26 pm:        Donald is there anyway you could get the dyno sheet scanned and emailed to me or one of us so we can see the results of the Jardine   Donald Posted on Wednesday, October 22, 2003 - 07:50 pm:        BadS1-I have the dyno sheet, But I do not have scanner. I can faxed it to someone. So they can post it.   Buckinfubba Posted on Thursday, October 23, 2003 - 08:52 am:        that does look tiny...but lets see the dynos.. too bad the jack points were lost. It sure is shiny and full of bling bling. actually the length may give it some low down torque.   Brucelee Posted on Thursday, October 23, 2003 - 09:13 am:        Any data on how much this weighs. The stock muffler is 15 or 16lbs. This looks much lighter!!!!