Author |
Message |
Koz5150
| Posted on Monday, March 21, 2011 - 02:52 pm: |
|
I am looking for any info about if this has worked, been tried, or failed? I did find one post about someone here who had attempted to sell a sprocket in 2008 and I am trying to follow up on that. Looking for answers to the following: 1. Are the bolt holes in the same location? 2. Would I have to use a longer belt? (uly belt comes to mind) 3. Do the 61 tooth and 68 tooth have the same offset / belt width. If you have any info on this it would be greatly appreciated. Thanks, Koz5150 |
Blackm2
| Posted on Monday, March 21, 2011 - 04:17 pm: |
|
I believe it is the center hole diameter that won't work. Buells are smaller if I remember right. |
Koz5150
| Posted on Monday, March 21, 2011 - 05:02 pm: |
|
Yeah, that can be easily bored out. i am more concerned with the bolt holes lining up. |
Onebadx1
| Posted on Monday, March 21, 2011 - 05:31 pm: |
|
Yes. They are the same bolt pattern. Like everyone else said, must bore out the center hole. I put one on my X1. |
Onebadx1
| Posted on Monday, March 21, 2011 - 05:52 pm: |
|
Correction: I put a 61 tooth sprocket on. Not sure about the 68T |
|