Author |
Message |
Squidravioli
| Posted on Friday, March 18, 2011 - 09:23 am: |
|
I am getting some spewage from my primary vent hose that runs up my tail section on my 00 X1. I have scoured the forum and it seems that a common issue is the crank seal. I am hoping to be able to replace the crankseal soon. I would also like to put a catch can on the end of that hose. How do I make one? |
Jramsey
| Posted on Friday, March 18, 2011 - 10:27 am: |
|
The spewage will cease once the crank seal is replaced. If your worried about it put a small fuel filter on the end of the vent hose. |
Squidravioli
| Posted on Friday, March 18, 2011 - 10:58 am: |
|
Thanks, do you know what size diameter that hose is? |
Jramsey
| Posted on Friday, March 18, 2011 - 12:52 pm: |
|
3/8" ID. |
|