| Author |
Message |
    
Motoqueiro
| | Posted on Tuesday, March 08, 2011 - 04:55 pm: | 
|
Hello
I'm in need of expert advise
xb9sx 2005
started to misfire, did a tps reset, and now she cant hold idle revs on its one, flames from the inlet and cots out
already seen plugs(replace them), wires, going for a new O2 sensor tomorrow, but I've read that the temp sensor can have an effect on the fuel timing thing, and the injectors can be dirty
what do you think? she's been running good for 6 years now
thanks |
Blake
| | Posted on Wednesday, March 09, 2011 - 12:18 am: |
|
Suspect bad TPS reset.
Idle screw backed all the way off, throttle snapped fully closed, perform TPS reset (reflash ECM with TPS voltage), then set to approximate idle, start bike, adjust idle.
Check TPS output voltage to ensure it is in required range. |
Motoqueiro
| | Posted on Wednesday, March 09, 2011 - 03:28 am: |
|
Did the tps reset several times as you say,(I use ECMspy), what is this reflash ECM with TPS voltage??? and what is the procedure to check the tps output voltage
Thanks |
Motoqueiro
| | Posted on Wednesday, March 09, 2011 - 06:03 am: |
|
Tried to buy a new O2 sensor on the car parts supply today, but, as they are the experts, bike lambda sensors are not the same as cars so piss of
Disconnected the head temp sensor, she goes to the roof but stays there, can this be the problem?
Damn thing this electronic mambo jambo voodoo |
Kalali
| | Posted on Wednesday, March 09, 2011 - 03:21 pm: |
|
"...she goes to the roof but stays there.."
Explain? |
Motoqueiro
| | Posted on Wednesday, March 09, 2011 - 08:10 pm: |
|
she doesn't stay there very long (+-30s)then detects an error and cuts of
I'm truing to make a megalog file whit ecmspy but the damn thing don't record |
Terrys1980
| | Posted on Wednesday, March 09, 2011 - 08:27 pm: |
|
Are you using Windows Vista? |
Motoqueiro
| | Posted on Thursday, March 10, 2011 - 04:03 am: |
|
yes, its the vista version, why? what's windows blocking now? |
Terrys1980
| | Posted on Thursday, March 10, 2011 - 07:12 am: |
|
I had to disable UAC - user account control to do logging. |
Motoqueiro
| | Posted on Thursday, March 10, 2011 - 09:02 am: |
|
how do you do that, sorry for my stupidity, plus I don't have the laptop whit me now to check it out |
Terrys1980
| | Posted on Thursday, March 10, 2011 - 03:49 pm: |
|
Select user account control from the control panel. When it comes up there should be an option to turn user account control off. |
Motoqueiro
| | Posted on Thursday, March 10, 2011 - 08:36 pm: |
|
done, now it's time for bed it's late in this country tomorrow i'll try again |
Motoqueiro
| | Posted on Friday, March 11, 2011 - 05:32 am: |
|
Hey Terrys1980 if you were here, I'll give you a kiss
Thanks man
iupi |
Froggy
| | Posted on Friday, March 11, 2011 - 10:32 am: |
|
I have no issues with UAC on if I rightclick the ECMspy icon and pick "Run as Administrator". |
Motoqueiro
| | Posted on Friday, March 18, 2011 - 07:49 pm: |
|
Problem solved, believe it or not, dirty injectors, will go for a ride tomorrow to see if all is good |
Motoqueiro
| | Posted on Saturday, March 19, 2011 - 04:09 pm: |
|
PERFECT
My advice, go for the unexpected, it's always what I'm not expecting that is wrong |
|
Troubleshooting (Poor Starting/Running/Handling/Ride Issues) »
Archive through July 18, 2011 »
Misfire/revs on its one/no idle