Author |
Message |
Spacecapsule1
| Posted on Friday, February 25, 2011 - 05:45 pm: |
|
when i activate a turn signal, the flasher buzzes. pretty loud. the signals don't flash either. I installed some LED turn signals but not sure what could have happened. I didn't mess with wiring or anything, just swapped the stock signals for the new ones. time for a new flasher, or is something else wrong? |
Froggy
| Posted on Friday, February 25, 2011 - 05:51 pm: |
|
You need a LED flasher for LED signals, American Sport Bike sells one. |
Natexlh1000
| Posted on Friday, February 25, 2011 - 06:38 pm: |
|
The normal bulbs draw more current than LEDs and the original flasher in anticipating this. It's as if you took out the bulbs |
Spacecapsule1
| Posted on Friday, February 25, 2011 - 07:55 pm: |
|
okie dokie, thanks fellas. just wanted to make sure thats all it was... |
Terrys1980
| Posted on Saturday, February 26, 2011 - 11:56 am: |
|
Any EP-36 flasher will work and can be found at most auto parts stores. |
Al_lighton
| Posted on Saturday, February 26, 2011 - 01:14 pm: |
|
Its on the store here: http://www.americansportbike.com/shoponline/ccp0-p rodshow/16086.html Al |
Spacecapsule1
| Posted on Saturday, February 26, 2011 - 03:05 pm: |
|
awesome. thanks everyone! |
Ridesinnm
| Posted on Friday, March 04, 2011 - 04:30 pm: |
|
Thanks for the info on the EP-36 flasher. I just got one at AutoZone for $9.99, and it works great. Lots better than wiring in a resistor. |
Terrys1980
| Posted on Friday, March 04, 2011 - 04:40 pm: |
|
No problem! |
|