G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Jag1046 Posted on Tuesday, February 22, 2011 - 11:26 am:        Just bought a 97 S3 Top end redone and new Barnett Clutch. I have been riding since I was 5 and built several bikes. Just looking for Information on Interchangeable parts on The Tubers. Can I use the Fairing and Rear Section from the S1 or the M on the 97? Will Newer Showa forks work? Best exhaust?? Thank you John   Xl1200r Posted on Tuesday, February 22, 2011 - 01:09 pm:        Forks will fit, not sure if you'd need new triples, though. Tail from an M2 will fit as the frame is the same, an S1 will not without some modification to the frame. The fairings from either can go on provided you have all the hardware for the headlight and such. You might want to consider finding an M2 owner that wants S3 bodywork and trade. Welcome!   Davefl Posted on Tuesday, February 22, 2011 - 01:29 pm:        M2 and S3 tail sections are not a direct swap. I have both and the frame is not the same.. Not saying it can't be done but is not a bolt on.   Jag1046 Posted on Tuesday, February 22, 2011 - 01:59 pm:        Thanks for the Answers! here is a pic of the bike I bought. I am wanting to turn it into a Street Tracker for my son.. Actually he and I have built a few bikes together and this will be our Summer project.. I would actually like to go with the Dual headlight setup with a fly screen. http://i16.photobucket.com/albums/b30/jag1046/DSCN 1106.jpg

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: