G oog le Buell 1125R Forum | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Smit3833 Posted on Saturday, February 05, 2011 - 08:44 pm:        I had an unfortunate tip over accident in my garage and smashed up the clutch cover. It bent up the metal so I can't just replace that plastic cap. Does anyone know where I can find this replacement part? I have a 2008 and I hear they changed the design for 2009, made the 2008 design obsolete, and it would require some new internals as well. Any help?   D_adams Posted on Saturday, February 05, 2011 - 08:56 pm:        I think the cover is still the same, just different puck and internals. Here's the puck. http://www.americansportbike.com/shoponline/ccp0-p rodshow/18032.html And the decal. http://www.americansportbike.com/shoponline/ccp0-p rodshow/18033.html Internals. http://www.americansportbike.com/shoponline/ccp0-p rodshow/18048A.html I looked on fleabay but the only ones there were rashed up pretty bad. Might try another sponsor (HD dealer) to get the actual cover.   Lovedabueller Posted on Saturday, February 05, 2011 - 09:14 pm:        Here's a pretty cool one!!!!   Guard_rail Posted on Saturday, February 05, 2011 - 11:09 pm:        Lovedabueller. Where did you get that from and how much does it cost???   Pmjolly Posted on Saturday, February 05, 2011 - 11:33 pm:        I just replaced my 08 cover because mine fell over in the garage with a box end wrench on the bleeder. The old cover, which I still have, leaks slightly at the bleeder valve. I had to buy a new cover from the dealer. The internals are the same if you have already done the upgrade for the leaking clutch.   Bextreme04 Posted on Sunday, February 06, 2011 - 01:13 am:        you've totally compromised the structural integrity of that cover keith!   Sprintst Posted on Sunday, February 06, 2011 - 01:44 am:        could a shop repair that? and your heat shield needs trimming on that fairing! (Message edited by sprintst on February 06, 2011)   Lovedabueller Posted on Sunday, February 06, 2011 - 08:31 am:        Guard_rail.... I MADE IT...... NICE huh??? lol Bextreme04.... i know i did... lol its the structural focal point of the whole engine....   Smit3833 Posted on Sunday, February 06, 2011 - 12:09 pm:        Thanks for the input. That cover looks good lovedabueller. And yes I need to take care of that heat shielding, the adhesive came loose apparently and its peeled back, not excess material that needs a trim.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: