Author |
Message |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Berkshire
| Posted on Monday, May 14, 2007 - 11:14 pm: |
|
hey guys! The benefit I had in mind would be that with the center bearing, the belt wouldn't be trying to yank the pulley off the wheel. It's like when you use a ratchet with an extension on it - if you don't hold the head of the ratchet with your other hand to stabilize it, then the socket will slip off the nut. The pulley is like the ratchet, and the belt is like your hand pulling on the handle (the top of the pulley). The offset between the centerline of the belt and the centerline of the tire is like an extension. The longer the offset, the more benefit you'd get from a center bearing. that's my theory, anyway. If you just took an open-centered pulley, drilled 5 holes, and bolted it to the blast wheel with some spacers in between, I figure something would break, and probably cause MAJOR unpleasantness! But if you used a pulley with a center bearing that rode on the rear axle (or on custom bushing/spacers), then the wheel/pulley spacers would just have to deal with the torque, and not the "wrenching the pulley off the wheel" effect. Also, if the spacers did fail, then (in theory) the pulley would just freewheel, instead of jumping around and jamming in between the wheel spokes and the swingarm or some other catastrophic thing. I was thinking a single ring would be more stable than 5 separate spacers. I felt around on the back of a v-rod pulley at a dealership yesterday, and it didn't seem as flat as I had hoped in the area where I think the blast rear wheel pulley bosses would line up. I guess a spacer ring could also be a bolt circle adapter. ...but I seriously doubt that I could make parts of the required quality on my drill press! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Gearheaderiko
| Posted on Tuesday, May 15, 2007 - 07:34 pm: |
|
Certainly a theory worth merit, but unfortunately I dont think anybody is going to do it soon, unless they really have a need for it. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jlo
| Posted on Saturday, October 04, 2008 - 08:34 pm: |
|
I have a 2002 Blast and I put a Sportster Drag pipe on it and a velocity stack off a sportster and I also replaced the shock with a strut and it lowered it about three inches an}}d made it rigid.I am getting a lot of looks and comments. Every one likes the looks and ask me what it is.They can't believe its a blast. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Gearheaderiko
| Posted on Saturday, October 04, 2008 - 08:49 pm: |
|
Welcome Jlo! Pictures? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Jlo
| Posted on Saturday, November 01, 2008 - 08:54 pm: |
|
I will send some pictures when I get some and figure out how.I just changed my head light.I put some side mounts from the tubes and put a 5"chrome chopper headlight in place of the stock one.I also removed the small piece above the head light. I put some 6" dog bone risers.and put drag bars on it.New grips and mirrors.This bike had been setting for three years in salt air.You can imagine what kind of shape it was in.I am mounting a tach between the dog bones. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Thump
| Posted on Sunday, November 02, 2008 - 09:14 pm: |
|
Looking forward to some pics.![](http://www.badweatherbikers.com/buell/clipart/biggriney.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Sunday, December 06, 2009 - 11:03 pm: |
|
So ive got an 05 Blast just sitting around at my shop and a frame jig thats not being used at the moment along with a FULL machine shop at my disposal so i made up my mind. Gonna do a custom no downtube frame that goes down into a hardtail. Also want to do the board track style fuel tank(mounted underneath the backbone). So boardtrack racer it is!! Plus i cant sell it now anyways cause i kinda promised it to my girlfriend... |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ezblast
| Posted on Monday, December 07, 2009 - 11:07 am: |
|
Sounds like a plan! EZ |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Thursday, January 14, 2010 - 12:22 pm: |
|
Getting there slowly but surely. Heres a pic of the frame im starting to mock up for it. (pic was taken a couple weeks ago so it is alot further along now)
![](http://www.badweatherbikers.com/buell/messages/20164/529294.jpg)
|
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Spudnik
| Posted on Saturday, February 20, 2010 - 10:21 am: |
|
Hey Texas... Are you making that new frame yourself? Would you be interested in building a custom frame for someone? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Saturday, February 20, 2010 - 02:24 pm: |
|
Hey, Spudnik. Yeah, im making the frame myself(well with my machinist since hes a better welder... lol) but yeah, im building the bike completely in house. Yes, I would be interested in doing some custom frame work. PM me and we can talk more about what it is your looking for. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Friday, September 24, 2010 - 12:42 pm: |
|
Some more pics of parts for the custom boardtracker. Here is the DNA -4 powdercoat black springer front end.
Here are the rims im using. Off an old Yamaha XS650. They are 19" and using both front rims for front + rear for that boardtracker look. They will be powdercoated before going on.
![](http://i36.photobucket.com/albums/e13/frankysfree/Bike%20Stuff/DSC00371.jpg) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Spade115
| Posted on Friday, November 12, 2010 - 10:43 am: |
|
Really like the way the frame is coming out, do you have any update pics? I have an idea for a frame and I shot you a email a while back, have just been busy. Hope all is well at the shop J.Rodriguez |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Friday, November 12, 2010 - 11:18 am: |
|
No updates yet. Its been a mad house lately and havent even been able to do more than think about working on it. I have another surgery on my foot this monday and will be down for awhile so i dont see it being done for at least a month. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Saturday, November 27, 2010 - 06:28 pm: |
|
Well, had the surgery on my foot. Gonna be at least a month before i do anything more on the bike. I did trade a jet washer i had to a buddy who builds, among other things, custom turbos at his performance shop. Im going to use the Garrett T-3 turbo afterall. He is going to build me a custom impeller to get the characteristics i want out of it. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Gearheaderiko
| Posted on Saturday, November 27, 2010 - 06:33 pm: |
|
Thanks for keeping us posted. Take care of the foot. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ezblast
| Posted on Saturday, November 27, 2010 - 08:59 pm: |
|
![](http://www.badweatherbikers.com/buell/clipart/thumbsup2.gif) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Spade115
| Posted on Thursday, December 16, 2010 - 12:52 pm: |
|
Good news on the turbo man Glad every thing is turning out the way you need it. J.Rodriguez |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Olesarge
| Posted on Saturday, January 29, 2011 - 11:59 pm: |
|
If you plan to use a chain drive to hold the power of the turbo, what type engine pulley do you plan to use. I am working on a 2002 Blast engine into a Brass Balls Bobber rigid frame. Any help will be appreciated. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Sunday, January 30, 2011 - 03:17 pm: |
|
To tell you the truth i havent gotten that far yet. It uses a sporty transmission so if you find a chain drive conversion for a sportster it should work. Im actually planning to fab up a small brake rotor to the front drive pulley and have a hidden brake similar to something they sell for big twins, except the ones i saw for BT's are all belt driven. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Sunday, January 30, 2011 - 03:24 pm: |
|
http://www.zippersperformance.com/catalogue/showpr oduct.asp?cat=822&prod=2167 http://www.hotbikeweb.com/tech/1009_hbkp_led_sled_ sportster_chain_conversion/index.html http://www.bakerdrivetrain.com/xl/index.htm A quick google search turns up a couple different sportster chain conversion kits. You wont be able to use the stock blast rear wheel without a custom fabbed adapter plate, but if your going chopper/bobber your probly changing the wheels anyway. Anyways, hope this helps (Message edited by Texas_firebolt on January 30, 2011) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Olesarge
| Posted on Sunday, January 30, 2011 - 10:45 pm: |
|
Thanks Firebolt, your links have given me the right place to start. I have a set of 07 Sportster wheels that I plan to use (Narrow glide front end for the frame). I am only using the engine and parts of the wiring harness for the project. Will post some pics when I get farther along. I am new to the Buell scene but couldn't pass up the deal on this engine/bike. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Gearheaderiko
| Posted on Monday, January 31, 2011 - 12:28 am: |
|
Welcome Olesarge! |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Spade115
| Posted on Monday, March 28, 2011 - 12:55 pm: |
|
Your useing a Blast motor also olesarge? Sounds intresting with the BBB frame. Any pics yet? |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Olesarge
| Posted on Tuesday, March 29, 2011 - 11:29 pm: |
|
No pics yet, have been slacking a bit. Weather has gotten good to ride and been putting miles on my Sportster. Hope to make some progress this weekend. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Texas_firebolt
| Posted on Tuesday, April 05, 2011 - 12:27 pm: |
|
Little update guys. I moved my shop to a new, bigger location about a month ago. I didnt have a welder since i was using the machine shops welder since we were in the same building, but i bought a Miller TIG welder a couple weeks ago, and since then ive been having problems with my foot from a wreck i had a couple years ago and ended up going in last week for an emergency surgery to have it amputated after i got a real bad infection. So now im waiting to heal up, then ill be getting back on it. Its always something that comes up but it will be done one of these days. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Spade115
| Posted on Tuesday, April 05, 2011 - 02:24 pm: |
|
If I manage to get that way again I will call some buddies, we'll raid the shop and see if we can help with anything Cause after wards I might need a copy of the frame for mine :P hope you heal well and Good luck with everything P.S. We also need an update Photo :P Spade115 J.Rodriguez (Message edited by Spade115 on April 05, 2011) |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Ezblast
| Posted on Tuesday, April 05, 2011 - 10:06 pm: |
|
Get well quick! Its great to hear from you! Looking to find an XBS tail myself at a low price - lol - EZ |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Spade115
| Posted on Friday, April 08, 2011 - 10:18 am: |
|
I was informed about something Led Sled Custom is building for their Evo sporty and thought it might work for the blast, and would be great on your cafe build Fire. Evo Sporty Kick Starter. I plan to get one eventually Would be great to fire up a blast with a kick. |
![Top of page](http://www.badweatherbikers.com/buell/icons/mark_top.gif) ![Previous message](http://www.badweatherbikers.com/buell/icons/mark_up.gif) ![Next message](http://www.badweatherbikers.com/buell/icons/mark_down.gif) ![Link to this message](http://www.badweatherbikers.com/buell/icons/link-up.gif)
Gearheaderiko
| Posted on Tuesday, May 17, 2011 - 10:49 am: |
|
Keep us posted on the kickstarter. A link if possible. While a kickstarter would be cool, kicking an old Sportster was not for the timid! An Evo Sportster even worse. And big thumpers were never on the easy kick list. Big Twin Harleys - easy. Go figure! |