| Author | Message | ||
     Chopperboy |
Twin Tail Pad (New) - $50 Race ECM - $150 Stock ECM - $50 Stebel Horn (New) - $50 Chin Fairing Center Piece (New) - $25 | ||
| Nillaice |
what model/color stebel air horn? wiring harness/instructions included? | ||
| Datsaxman |
Interested in your ECMs, and the Stebel if you still have it! steve | ||
| Chopperboy |
Not sure on the Stebel model number? It is the smaller Stebel in black. All wiring, instructions, etc. included. | ||
| Alan_ |
Hi, what colour is the chin fairing center piece, new black or old style grey ? If black, I'll take it. Interested in the Tail Pad also, is it the slip on triple tail pad ? Email is pyrotekno at hotmail dot com if you have more info. Thanks. | ||
| Ratbuell |
Even if its gray, get some Krylon Fuzion paint and paint it. I did my center (orange '06, black chin with gray center) in black about a year and a half ago, its holding up just fine. That Fuzion stuff really bonds to plastic nicely. (Message edited by ratbuell on December 31, 2010) | ||
| Delta_one |
take 35shipped on the horn? | ||
| Alan_ |
Cheers Ratbuell, I'll maybe give that a go, sounds good. | ||
| Toona |
Next in line for then triple tail pad if Alan_ passes on it. | ||
| Ratbuell |
Alan - just clean it good with either alcohol or brakleen to get all the oils off it. Spray it warm (not like here, where it's in the 20s outside) and do NOT use primer. Light coats, I think I did about five to cover it completely. I've got to take some garage pics here today anyway, I'll post one for ya later. | ||
| Chopperboy |
Email sent to Alan. Everything is still available. Thanks. | ||
| Alan_ |
Thanks Chopperboy, Toona can take Tail Pad if he wants it as was after a black chin center so will probably just paint mine. | ||
| Toona |
I'll take the tail pad. PM sent to get payment info. | ||
| Chopperboy |
Tail pad SOLD | ||
| Bobbuell1961 |
PM sent | ||
| Chopperboy |
ECM's, Stebel and Chin Fairing Piece still avialble. | ||
| Firefight100 |
What year is the ecm for? (race ecm) | ||
| Chopperboy |
Firefight100, The ECM was installed on my '06 Uly and will work on '06 and prior XB12 Buells. It is the factory Buell ECM, BTW. | ||
| Toona |
Tail pad arrived today. Thanks! | ||
| Ratbuell |
Actually, the ECM should work for '07 and earlier. They didn't change things until '08. If it's a Buell parts and accessories ECM, it will run great...but doesn't have muffler valve control. Just for those who might be wondering. | ||
| Chopperboy |
Ratbuell, You are correct. Thanks for the clarification. Forgot the '07's had the same system as the prior XB12's. | ||
| Panhead_dan |
So you have 2 ecm's, right? Not interested in the race ecm but the other one. If it is a stock ecm for an '06 XB12X that is not damaged and is functional, I want it. Is it cracked? | ||
| Delta_one |
payment sent on the horn | ||
| Chopperboy |
Panhead, The stock ECM is basically new. The stock ECM was removed from my Uly before it left the dealer. Thanks. | ||
| Panhead_dan |
PM sent. | ||
| Chopperboy |
Stock ECM sold to Panhead_dan | ||
| Richd |
Hey....does anyone know where I can get a stock "rear fender/license plate holder/turn signal" unit for a 2007 Buell Ulysses? Just missed one on ebay..... RichD | ||
| Delta_one |
you will probably have better luck posting that question on the uly board and not in somebody's for sale thread | ||
| Delta_one |
got my horn today (it was probably delivered days ago and I didn't know it) but I am posting these pics for two reasons one, I have seen flaming posts about packing two, this packing job seemed to be above and beyond the standard I have ever received even from online retailers. I just thought anybody interested in parts from Chopperboy would want to know.   arrived in perfect condition, thanks Todd! | ||
| Chopperboy |
Thanks Arron. Send you an email on your questions. Keep me posted on your Stebel install. | ||
| Uly_dude |
Hey Chopperboy, what is the part # of the Race ECM? I'm interested but need the one that works with a K&N filter and Jardine RT1 can. Did you actually use the race ECM? How did the bike run? You can email me at greginmn at hot mail dot com if that's easier. Thanks. | ||
| Panhead_dan |
+1 on the packaging. The stock ECM was packaged right and survived the trip fine. That means a lot to me. Thank you sir. | ||
| Chopperboy |
Uly_dude, Not sure on the part number but the module that was part of the previously offered race kit by Buell. I used the ECM on my Uly for approximately 8K. Hope this helps. |
