G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile

Author Message   Arthurxb Posted on Tuesday, December 28, 2010 - 09:36 am:        I was wondering about replacing my rivets with bolts I see that they sell a kit but anyone here have the size of the bolts to use. I have heard 8/32 but that seems smaller than what I got. How long also. Appreciate any help. -Arthur-   Terrys1980 Posted on Tuesday, December 28, 2010 - 01:25 pm:        The rivets are 1/8" so the 8-32 bolt would work. I would go with a 3/4" length to allow for washers and ny-lock nut. If the 3/4" length is too long you can always cut it with a the bolt cutter part of most wire crimper/strippers.   Motorbike Posted on Friday, December 31, 2010 - 02:06 pm:        I used stainless steel button head allen screws on mine and also installed flat washers and SS nylock nuts on the inside. Looks nice!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: