| Author | Message | ||
     Nillaice |
2003, black, 3898 mi. it was lowsided into some mud on the right side, so it has some very shallow scuffs on teh plastics. 7/10 it ran with no issues before we went on vacation, but after we got back it started acting up. sputtering and stalling out when taken above idle RPM's. couldn't figger it out, and i have been ignoring it for-ever. it is worth more in parts than it is fixed-up and running. hopefully this will help put many more blasts back on the road, or help keep them on the road.                          not pictured but available for sale is the manual. i think i'm gonna keep teh grips, levers and maybe the dual headlights too. it is also listed on craigslist. dibbs will be honored on here, but i'd rather not box and ship when i can sell face to face. i'll take paypal, and can disassemble, tho i'd rather sell it in mostly whole parts/components | ||
| Slowride |
How much for the left and right rear sets(foot pegs and mounting rails)? I am assuming the right one isn't to bent in? | ||
| Nillaice |
ummmm price check? i don't know what the going rate is. eyeballing, it looks fine. some of the paint has rubbed off (see first pic), but no bare metal is exposed. both of the pegs have been drug thru quite a few turns, so the bottom corners are no-longer encased in rubber. i'll do my best to retrieve the fastners for you from the 'black hole' in the corner of the frame. anything else you want to buy? there'll be room in the box for more ... | ||
| Slowride |
I'd take all of the turn signals too... | ||
| Bosephus |
I would like the Air filter, coil and if it's the updated one the ignition module. Let me know priced shipped to 81001. Thanks | ||
| Nillaice |
Slowride; even the busted one? OKAY! Bosephus; the ignition module is the same one i bought it with. i don't know what you mean by 'updated' and do you want the 3 yr old coil or the 6 yr old used coil? (Message edited by nillaice on November 17, 2010) | ||
| Prichmon |
I need mirrors and the rear muffler bracket? Got a price shipped to 25271 | ||
| Bosephus |
Sorry the updated part number is 32687-00ya | ||
| Dinuns1 |
pLESE A PRICE CHECK ON EXHAUST AND ENGINE | ||
| Nillaice |
did your muffler bracket wear thru at the bolt holes? cus this one did too, so i welded some scrap plate metal on and re-drilled teh holes. it worked good for about a thousnad miles. but i haven't seen it in a while lemme look for it, and see if it can be found. | ||
| Nillaice |
 that's what i got, not the updated 'a' version. are you still interested? | ||
| Nillaice |
Diniuns1, didn't i just buy an XB rotor from you? | ||
| Bosephus |
Matt, I will pass on the module but price me on the filter and coil. Thanks | ||
| Slowride |
Yep, even the busted one. Price and shipping to 75068 | ||
| Nillaice |
65 shipped for the filter and coil? 100 shipped for the rearsets and blinkers? 45 shipped for teh mirrors and rear muffler bracket?(if i can locate it) i'm gonna need a little help or time or both for the motor/trans and assoiciated parts. ...still a little un clear on what all assoicated parts you'd want. did you want the rear muffler bracket, filter and coil? are you trying to transplant the motor for use in another vehicle? ... wanna make me an offer on the whole package-deal? | ||
| Bosephus |
Matt, Sorry my friend picked up a coil for the blast yesterday but still need the filter ! Let me know, Thanks | ||
| Harley_jethro |
PM sent on handlebars | ||
| Slowride |
Nillaice, How do you want payment on the rearsets and blinkers? Paypal, USPSMO? | ||
| Prichmon |
>>>did your muffler bracket wear thru at the bolt holes? No it came with a KERKER and a stock exhaust w/out any hardware.cus this one did too, so i welded some scrap plate metal on and re-drilled teh holes. it worked good for about a thousnad miles. but i haven't seen it in a while lemme look for it, and see if it can be found. I need mirrors, a carb needle, A low seat??? zip is 25271. Please LMK... prichmon74 @ yahoo. com | ||
| Nillaice |
the muffler bracket is MIA. don't hold your breath; but if i come across it, you'll be the first to know. just the filter- 40 shipped it's a high seat, but you could trim the foam and re-staple the pleather. ill ask for 50 plus actual shipping fees. + 20 for the mirrors shipped in the same box. (Message edited by nillaice on November 20, 2010) | ||
| Nillaice |
am i off my rocker here, guys?!?! i'm not trying to get new prices for these used parts, but ... here's a recent snapshot from my inbox; From: matthew vanella <m-----vanella@------.com> Add to Contacts To: Marty Nowak <ds----nva@------.com> you got a great deal on that bike! i threw down almost 2thousand 3 years ago when buell was on the up and up, and before the blast was discontinued. now that BUELL has been cut at the chopping block, everyhting has seemingly gone to the dumpster i'm no trying to scalp you on these prices, but i can't do 100 for your entire list. but my 400 asking price IS negotiable. are you trying to get everything powdered and perfect so you can swap it all in a few days? -matt -------------------------------------------------- ------------------------------ From: Marty Nowak <ds-----nva@-----.com> To: matthew vanella <m----vanella@--------.com> Sent: Fri, November 19, 2010 9:45:12 PM Subject: RE: Buell blast Woah I was thinking more like $100. I only paid $350 for my bike running. Have you see what these parts are going for on ebay? Next to nothing. Sorry I can't do $400. Especially considering im just trying to powdercoat everything. Good luck with your partout though. Marty Sent from my HTC Touch Pro 2 -------------------------------------------------- ------------------------------ From: matthew vanella <m-----vanella@-------.com> Sent: Friday, November 19, 2010 9:36 PM To: Marty Nowak <ds----nva@------.com> Subject: Re: Buell blast i'm not sure about the condition of your current parts, but id say this bike is generally in good cosmetic condition -the plastics are scuffed. the turnbuckles have some very light rust. front forks have some oxidization on the aluminum, and gooey-sticker from an apartment parking pass the wheels are dirty and oxidized, but unscatehed and true. the footpeg brackets are straight, but the right bracket has the top layer of paint worn thru as seen in the pics the swingarm is flawless as far as i know. i'll have to look it over with a critical eye for you. suface prep and powdercoating will remove the oxidation layer and clean them all up i'll ask 400 for everything on your list 200 for both wheels, with rotors, bearings, tires, and pulley. 100 for the front forks 75 for the swingarm 15 for the turnbuckles 10 for the right controll switch assembly thing let me know what you think about these prices. the more you buy, the more flexible i will be. when can you come over to check it out? monday is my next day off. thanks -matt -------------------------------------------------- ------------------------------ From: Marty Nowak <ds----nva@-----.com> To: sale-2a8je-2065462542@craigslist.org Sent: Fri, November 19, 2010 10:22:47 AM Subject: Buell blast ** CRAIGSLIST ADVISORY --- AVOID SCAMS BY DEALING LOCALLY ** Avoid: wiring money, cross-border deals, work-at-home ** Beware: cashier checks, money orders, escrow, shipping ** More Info: http://www.craigslist.org/about/scams.html I'm in the process of rebuilding a blast I just picked up, and would like to see about some parts. I'm hoping to get some that are in better condition than mine so I can have them powdercoated. Here is what I'm looking for: Rear swingarm Front forks Footpeg brackets Front and rear wheels Start stop switch Engine mount turnbuckles How much would you want for these? Thanks, Marty | ||
| Nillaice |
mateovanella@yahoo.com is my paypal address. or i can send you a fund request at your adress. | ||
| Nillaice |
how about 492 for the: motor,carb,intanke, brain,trans i'll let you pay whatever shipping is. prolly gotta be freight, so you might wanna send it to a buiseness adress, instead of a residential one. there's a copy shop around the corner from me, and they are nice enough to let me use thier adress once in a while. | ||
| Aric1968 |
I'm looking for a high seat, and I can't quite tell if this one is chewed-up or not. From the picture, it just looks dirty. Can you advise, and a price shipping to 18103? | ||
| Nillaice |
it is a little dirty. the bottom corners have the plastic pieces on them, but there is a nick in the front corner. 67 shipped? | ||
| Aric1968 |
Any chance of getting a closer pic of the seat, in particular showing the areas you're talking about? | ||
| Nillaice |
sure, when i get home from work tonight. | ||
| Nillaice |
      | ||
| Bosephus |
Matt, Sent payment via paypal for the filter. Thanks | ||
| Nillaice |
it's boxed up, and will be sent out tomorrow or thurs. |
